Product Description:

The Q2AA07030DXP4U is a servo motor produced by Sanyo Denki for the Q SANMOTION Servo Motors series. It delivers precise rotary motion in automated pick-and-place heads, indexing tables, and similar closed-loop axes on factory floors. The motor works with a dedicated drive to translate command signals into accurate shaft position and speed, supporting repeatability in production tasks that require electronic gearing or synchronized motion profiles.

The motor has a 76 mm square flange for mounting to compatible gearboxes or brackets without additional adapters. The electromagnetic section provides a continuous mechanical power rating of 300 W, delivering mid-range torque for lightweight loads while limiting heat generation. Power is supplied by a 200 V mains class, so the stator windings match commonly available drives in the Q platform. During rapid indexing, the rotor can accelerate to a speed of 4500 to 5000 rpm, balancing response time with bearing life. The motor can operate in ambient temperatures from 0 to 40 °C, allowing the insulation system to remain within its thermal limits during continuous duty.

The medium-inertia rotor suits axes that need damping against load disturbances while retaining the ability to reverse direction quickly. Position data comes from the PA035C feedback element, which is a reduced-wiring absolute sensor that transmits multi-turn position information over a single cable to reduce harness bulk. This feedback can operate at relative humidity levels up to 90%, provided condensation does not form inside the sensing chamber. The enclosure helps protect the feedback components from ambient moisture during normal operation. The motor is supplied without a holding brake, so drive torque or an external clamp must retain static loads when the axis is stopped.