Product Description:

The Q2AA07020DXS2L AC servo motor is built by Sanyo Denki within the Q SANMOTION Servo Motors series. As a member of the Q Series, it delivers controllable torque and speed to positioning tables, pick-and-place heads, and other motion axes in automated lines. The motor interfaces with dedicated drives from the same platform, converting electrical commands into mechanical rotation for precise feedback-based motion control in industrial automation.

With a rated mechanical output of 200 W, the motor can continuously supply that power to a load while remaining within its thermal envelope. A square flange measuring 76 mm on each side sets the mounting footprint and aligns the shaft centerline with standard gearboxes or linear stages. The stator and rotor are sized so that shaft speed can be regulated from 4500 to 5000 min⁻¹, allowing a drive to match cycle-time demands without overspeeding the mechanical structure. Its windings are designed for a 200 V servo drive bus, so no additional voltage conversion is required in common two-hundred-volt-class control panels. The electromagnetic design produces a medium-inertia rotor, offering a compromise between rapid acceleration and stable load following in systems with a moderate downstream moment of inertia.

Continuous duty is permitted when the frame temperature is kept within 0 to 40 °C, protecting the insulation system against premature aging. Proper sealing and varnish allow operation at a relative humidity of up to 90% without condensation, so the motor tolerates moist indoor environments. Rotor position is reported through encoder assemblies selected from PP031, PP038, and PP062. Each option uses a reduced-wiring incremental encoder interface that lowers the cable count while still providing high-resolution incremental pulses to the drive.