Q2AA05020DXP5S Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA05020DXP5S is a medium-inertia servo motor from the Q SANMOTION Servo Motors series with a 54mm flange size and rated output of 200W. It operates at maximum rotation speeds between 4500 and 5000 min-1, is designed for 200V supply, and uses a reduced wiring absolute sensor model PA035C. The motor functions without a holding brake and is suitable for humidity up to 90% and temperatures from 0 to 40°C.
Internal Product Review
The Q2AA05020DXP5S is a Sanyo Denki Q SANMOTION medium-inertia servo motor rated at 200 W. A reduced wiring absolute sensor supports accurate feedback, and the 4500 to 5000 min-1 maximum rotation speed makes this motor an excellent fit for responsive motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Sanyo Denki manufactures the Q2AA05020DXP5S as part of its Q SANMOTION Servo Motors series. The unit is a servo motor used in industrial automation to deliver commanded rotary motion with precise feedback. This capability allows machinery such as indexing tables and small conveyors to position loads accurately and repeatably within a coordinated motion sequence. Its compact design is suitable for controlled axes that require responsive movement and consistent positioning during repetitive operating cycles.
The motor develops a continuous mechanical output of 200 W, providing suitable power for compact axes that require quick response without excessive heat generation. Its stator is wound for a 200 V supply, so it connects to compatible drive amplifiers on 200-volt-class buses. A medium-inertia rotor balances torque production with settling time, helping limit overshoot when the controller issues rapid direction changes. The motor has a rated speed of 4,500 rpm and can reach a maximum speed of up to 5,000 rpm, supporting both controlled feed movements and high-speed indexing. Its mechanical interface uses a 54 mm square flange, providing a standard mounting face for compatible gearboxes or ball-screw couplings without additional adapters.
The stator windings can operate at ambient temperatures from 0 to 40 °C. The insulation and varnish system can tolerate up to 90% relative humidity, allowing operation near cooling spray or humid processing areas when condensation is prevented. Position feedback is handled by the PA035C encoder, which reports rotor position to the drive for closed-loop motion control. This encoder is a reduced-wiring absolute sensor that returns multi-turn angle data over a two-wire link, simplifying cable routing in confined equipment spaces. The motor is supplied without a holding brake, so drive torque or an external locking device must secure vertical loads when power is removed. Proper mounting, compatible drive settings, and adequate ventilation help the motor maintain stable operation within its stated temperature and humidity limits.
