Q2AA05020DCPD5 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki Q2AA05020DCPD5 is part of the Q SANMOTION Servo Motors series and has a flange size of 54 millimeters. This medium-inertia motor features a rated output of 200 watts and a supply voltage of 200 volts. It is equipped with a 24V holding brake and a reduced wiring absolute sensor (model PA035C), and operates at a maximum rotation speed of 4500 to 5000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA05020DCPD5 is a servo motor manufactured by Sanyo Denki within the Q SANMOTION Servo Motors series. Designed for positioning and speed-control roles in industrial automation, the unit belongs to the vendor’s Q Series portfolio and integrates with matching digital amplifiers to drive conveyors, pick-and-place modules, and compact machine axes. Its medium-inertia rotor profile supports stable motion when moving moderate loads, providing a balance between rapid response and minimal mechanical resonance in multi-axis assemblies.
At the mechanical interface, the motor carries a 54 mm square flange that aligns with standard IEC mounts and keeps installation depth short. The stator windings are rated for 200 V operation, allowing connection to common servo drives in 200 V class systems. Under continuous duty, the motor delivers 200 W of shaft power. During peak demand, it sustains rotational speeds from 4500 to 5000 rpm without overshoot. The rotor and magnetic circuit use a medium-inertia design, so acceleration is quick while load-induced oscillations remain controlled. This combination supports accurate motion during cyclic indexing and profile-cutting tasks without requiring an oversized motor frame.
For vertical axes or emergency stops, the integrated 24 V brake locks the shaft when control power is removed, preventing the connected load from driving the motor backward. Reliable operation is maintained within an ambient temperature range of 0 to 40 °C and at up to 90% relative humidity, making the unit suitable for climate-controlled production floors. Rotor position feedback is supplied by the PA035C single-turn feedback element, which uses Sanyo Denki’s reduced-wiring absolute sensor technology. This sensor transmits high-resolution position data over fewer conductors, simplifying cable routing in compact machinery. The reduced conductor count also limits the amount of feedback wiring routed near motor power cables, helping protect position signals from electrical noise during high-speed motion sequences.
