Q2AA05010DXS00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q2AA05010DXS00M is a medium-inertia servo motor from the Q SANMOTION Servo Motors series. It features a 54mm flange size, 100W rated output, and a maximum rotation speed of 4500 to 5000 min-1. The motor operates on 200V, uses a reduced wiring incremental encoder, and complies with CE and UL standards.
Internal Product Review
The Q2AA05010DXS00M is a Sanyo Denki Q SANMOTION servo motor with 100 W rated output and a 200 V motor supply. Medium-inertia construction and a reduced wiring incremental encoder support stable motion control and straightforward integration. A strong choice for precise automation duty, especially with maximum rotation speed up to 5000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q2AA05010DXS00M is an AC servo motor manufactured by Sanyo Denki for the Q SANMOTION Servo Motors series. Designed for the Q Series architecture, the model delivers controlled rotary motion to pick-and-place arms, light transport stages, and other equipment that requires high-resolution speed control in industrial automation. Its mechanical interface uses a 54 mm square flange that aligns with compact gearheads and mounting brackets.
The motor has a rated output of 100 W, providing sufficient continuous power for small-load axes without excessive heat buildup. When driven by a 200 V amplifier, the shaft can reach speeds from 4500 to 5000 rpm, allowing fast indexing while remaining within servo bandwidth limits. The design uses a medium-inertia rotor, so the control loop can tolerate external disturbances while maintaining responsive positioning. The square flange and rotor design help keep resonance low and simplify servo tuning in machinery that cycles hundreds of times per minute. The winding is tailored to the supply voltage so peak torque remains available across the commanded speed range.
Feedback is handled by a reduced-wiring incremental encoder; compatible PP031, PP038, and PP062 sensor heads connect through simplified harnesses that reduce installation time. The motor is supplied without a holding brake, making it suitable for loads that can rely on drive torque or external clamps for standstill retention. The motor is supplied in its standard configuration and complies with CE and UL requirements for integration into industrial equipment. Permitted ambient temperatures range from 0 to 40 °C, and operation is allowed at relative humidity levels up to 90% without condensation. No derating factors are specified for altitudes typical of factory installations, allowing consistent thermal performance under normal operating conditions.
