Product Description:

The Q2AA04006DCS2C is a servo motor manufactured by Sanyo Denki for the Q SANMOTION Servo Motors series. Designed for industrial automation, the unit supplies commanded torque and velocity so that indexing tables, feeders, and similar motion axes can track position profiles with high repeatability. When paired with a compatible servo amplifier, it forms a closed-loop drive element that fits into multi-axis networks used in packaging, assembly, and inspection machinery.

This model delivers a rated mechanical output of 60 W, allowing low-power actuators to run continuously without thermal derating. Electrical energy is supplied to the stator windings from a 200 V motor supply, a common voltage for compact servo systems. The rotor-stator assembly has medium inertia, so its acceleration response supports stable operation when coupled to loads with moderate moments of inertia. Depending on the configuration, the maximum shaft speed ranges from 4,500 to 5,000 rpm, providing overhead for rapid indexing cycles. The square frame has a 40 mm or 42 mm mounting flange that fits many miniature gearboxes and positioning stages. Position retention during power interruptions is handled by a 24 V brake, which clamps the shaft until drive power is restored.

The motor can operate at temperatures from 0 to 40 °C and at a permissible relative humidity of up to 90%, making it suitable for climate-controlled production areas that experience temperature changes and elevated moisture levels. Feedback is provided through a reduced-wiring incremental encoder, which simplifies cable routing compared with conventional three-channel devices. The encoder is available with PP031, PP038, or PP062 sensor models, allowing the feedback resolution to be selected for the required control-loop bandwidth and positioning response.