Q1AA18750HXF36 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki Q1AA18750HXF36 is a low-inertia servo motor from the Q SANMOTION Servo Motors series. It has a flange size of 180 mm and a rated output of 7.5 kW. The motor operates at a supply voltage of 200 V and supports a maximum rotation speed of 3000 to 3500 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q1AA18750HXF36 is a servo motor produced by Sanyo Denki as part of the Q SANMOTION Servo Motors series. Designed as a drive element for CNC tables, pick-and-place axes, and packaging machinery, the motor converts electrical power from a compatible drive into controlled rotary motion. It can accelerate and decelerate rapidly while maintaining the precise position and speed control required by automated equipment. The motor is intended for applications with repetitive movement, controlled indexing, and frequent changes in rotational direction.
The motor provides a rated output of 7.5 kW, indicating the continuous mechanical power available at the shaft when it operates with forced ventilation or equivalent cooling. Its stator windings are intended for a 200 V motor supply, allowing operation with a compatible low-voltage industrial servo drive. The peak mechanical speed ranges from 3000 to 3500 rpm, providing additional speed capacity for applications with rapid positioning cycles. Mounting uses an IEC-compliant 180 mm square flange, which provides a rigid interface for attaching the motor to a machine frame or gearbox. A low-inertia rotor reduces the energy required for changes in speed and direction, helping the motor respond quickly to drive commands. The motor is supplied without a holding brake, so stationary loads must be retained by drive-applied torque or an external locking device when necessary.
The permitted operating conditions include an ambient temperature range of 0 to 40 °C and relative humidity up to 90%. Adequate airflow must be maintained around the housing so that heat from the stator windings can be removed during continuous operation. Installations exposed to ambient temperatures above the permitted range may require additional thermal management or reduced loading. Internal varnish protects the windings from moisture in humid air, while suitable bearing lubrication supports operation throughout the stated temperature range. The surrounding enclosure should prevent excessive condensation and direct liquid exposure because a relative humidity limit does not indicate protection against water ingress.
