Product Description:

The Q1AA07075DXS7D servo motor is produced by Sanyo Denki and belongs to the Q SANMOTION Servo Motors series. It is intended for general-purpose motion axes in industrial automation, where precise velocity and position control is required for packaging, semiconductor handling, or assembly stations. When integrated with a compatible Q-series drive, it converts electrical power into controlled torque, allowing the machine controller to accelerate, decelerate, and hold loads with repeatable accuracy. Its compact design and feedback options support machines that demand quick transient response without adding excessive mass.

This model operates from a 200 V three-phase bus and is suitable for 200-class systems. Under rated conditions, it delivers 750 W of continuous mechanical power at the shaft, providing sufficient capacity for midsize indexers or belt drives. Peak rotational velocity ranges from 4500 to 5000 rpm, enabling high surface speeds while keeping the electrical frequency within common inverter limits. A square 76 mm mounting flange supports accurate alignment with compatible machine frames. The permitted ambient temperature range is 0 to 40 °C, allowing cabinet or open-frame installation without auxiliary cooling when airflow remains unobstructed.

Dynamic performance is aided by its low-inertia rotor, which minimizes acceleration time and reduces following error during point-to-point moves. The motor supports the factory-installed encoder options PP031, PP038, or PP062, allowing the appropriate resolution and bandwidth to be selected for the application. Each option is a reduced-wiring incremental encoder, so fewer signal lines are required than with conventional differential outputs. The housing protects the stator insulation in atmospheres with relative humidity up to 90%. The motor does not include a holding brake, which keeps its mass and moment of inertia low for rapid reversals while requiring an external means of securing loads when power is removed.