Q1AA07075DXS00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
18 Seconds
The Sanyo Denki Q1AA07075DXS00M is part of the Q SANMOTION Servo Motors series and is a low-inertia, standard specification motor with a rated output of 750W. It features a 76mm flange size, operates within a temperature range of 0 to 40°C, and supports a maximum rotation speed of 4500 to 5000 min-1. This model uses a reduced wiring incremental encoder, runs on a 200V supply, and is compliant with CE and UL standards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q1AA07075DXS00M servo motor is produced by Sanyo Denki within the Q SANMOTION Servo Motors series. It is installed on precision automation axes where rapid acceleration, repeatable positioning, and compact frame dimensions are required. Coupled to a matching drive, the unit converts electrical energy into controlled rotary motion so conveyors, pick-and-place heads, or indexing tables can follow precise position and speed profiles set by a PLC. The drive regulates current according to feedback from the motor, allowing the axis to respond to changing motion commands and operating loads.
The mechanical interface uses a 76 mm square flange that aligns with standard planetary gearboxes and machine plates. During continuous operation, the shaft can deliver a rated mechanical output of 750 W when the motor is powered by a 200 V drive section. The motor has a peak speed range of 4500 to 5000 rpm, supporting applications that alternate between fast travel and precise positioning moves. A low-inertia rotor supports rapid acceleration and deceleration by reducing the rotating mass that the drive must control. Electrical insulation and construction comply with CE and UL requirements, supporting use in facilities that follow applicable safety and emissions rules. The motor is supplied without a holding brake, which leaves the shaft free when power is removed. Mechanical clamping, drive torque, or another external holding method is required if a stationary load must remain secured.
Operation is permitted at ambient temperatures from 0 to 40 °C and at a relative humidity of up to 90%. These conditions are suitable for indoor production areas that are not refrigerated or directly exposed to coolant spray. Position feedback is supplied by the installed encoder family identified as PP031/PP038/PP062. These reduced-wiring incremental encoders decrease cable bulk while maintaining the resolution needed for closed-loop position and speed control. The reduced conductor count can simplify cable routing through compact machine frames and crowded control enclosures. The standard Q Series configuration connects to a compatible servo drive without requiring a separate feedback conversion device.
