Q1AA07075DCS01M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q1AA07075DCS01M is a low-inertia servo motor from the Q SANMOTION Servo Motors series with a rated output of 750 watts and a flange size of 76 millimeters. It features a 24V holding brake, a supply voltage of 200V, and a reduced wiring incremental encoder as its sensor technology. The motor supports a maximum rotation speed of 4500 to 5000 min-1 and is compliant with CE and UL standards.
Internal Product Review
The Q1AA07075DCS01M is a low-inertia servo motor with a 750W rated output that feels well suited for responsive motion control. The reduced-wiring incremental encoder and 200V motor supply support clean integration and dependable feedback performance. A maximum rotation speed of 4500 to 5000 min-1 stands out as a strong performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q1AA07075DCS01M is a servo motor produced by Sanyo Denki as part of the Q SANMOTION Servo Motors series. Designed for closed-loop motion systems, this unit translates drive commands into precise shaft rotation so that automated machines can synchronize position, velocity, and torque across multiple axes. Its electrical characteristics allow straightforward connection to widely used 200 V servo amplifiers, giving equipment builders a compact rotary actuator for pick-and-place heads, indexing tables, and packaging lines. Its low-inertia rotor allows rapid acceleration and deceleration cycles without excessive overshoot.
A rated output of 750 W establishes the continuous mechanical power that the motor can deliver without exceeding its thermal limits. The stator is wound for 200 V service, matching the output of common industrial servo drives. During rapid cycles, the rotor can reach 4500 to 5000 rpm, enabling high traversal speeds when gear reduction is minimal. Mounting uses a 76 mm square flange pattern, which supports installation in compatible machine frames. For vertical axes or emergency stops, a factory-installed 24 V brake clamps the shaft when control power is removed, preventing the load from drifting. This braking arrangement provides mechanical holding when drive-generated torque is unavailable.
Continuous operation is permitted within an ambient temperature range of 0 to 40 °C. The winding insulation tolerates ambient humidity up to 90%, allowing the motor to operate in unconditioned assembly plants when condensation is prevented. Position data comes from a reduced-wiring incremental encoder, which lowers the required cable count while maintaining high-resolution feedback. Compatible reader heads include the PP031, PP038, and PP062 sensor models. Compliance with CE and UL requirements indicates that the applicable insulation, emissions, and safety clearances meet European and North American requirements. The motor should be installed with suitable cables, connectors, and a compatible servo amplifier to preserve feedback accuracy and brake operation.
