Q1AA06040DXP00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q1AA06040DXP00M is part of the Q SANMOTION Servo Motors series and features a low-inertia motor with a 400W rated output. This standard specification model supports a maximum rotation speed of up to 5000 min-1 and uses a 200V supply voltage. It has a 60mm flange size, is equipped with a reduced wiring absolute sensor model PA035C, and complies with CE and UL standards.
Internal Product Review
The Q1AA06040DXP00M is a low-inertia servo motor from Sanyo Denki’s Q SANMOTION series with 400 W rated output. A reduced-wiring absolute sensor using sensor model PA035C supports clean feedback integration and dependable positioning performance. Standard 200 V motor supply and 4500 to 5000 min-1 maximum rotation speed make the unit a strong fit for responsive motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q1AA06040DXP00M is a servo motor manufactured by Sanyo Denki for the Q SANMOTION Servo Motors series. As a rotary actuator, it provides closed-loop position and speed control for indexing tables, pick-and-place axes, and other automation applications that require compact, high-speed motion. The unit integrates with a matching drive through an absolute sensor bus, simplifying wiring and eliminating the need for a homing routine after each power-up.
This model provides a rated output of 400 W, which allows the shaft to deliver four-tenths of a kilowatt continuously without exceeding its thermal limits. Its square frame has a 60 mm flange, allowing installation with compatible gearheads and brackets without adapter plates. A 200 V winding allows the motor to connect to standard industrial servo amplifiers in the 200-volt class. During rapid acceleration, the rotor can reach a maximum speed within the range of 4500 to 5000 rpm, providing additional speed capacity for high-throughput motion cycles. The motor is supplied without a holding brake, so an external mechanical lock or drive-applied torque must maintain the load position when power is unavailable.
The electromagnetic assembly uses a low-inertia design, reducing the power required from the drive during quick starts and stops. The permitted operating temperature ranges from 0 to 40 °C, supporting consistent performance in typical control cabinets and on open machine frames. The motor tolerates up to 90% relative humidity, provided that condensation is prevented. Rotor position feedback is supplied by the PA035C reduced-wiring absolute sensor, which transmits multi-turn position data through a simplified connection to the drive. Compliance with CE and UL requirements indicates that the motor meets applicable provisions for insulation, grounding, and electromagnetic emissions in North American and European installations.
