Q1AA06040DCS01M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki Q1AA06040DCS01M is a low-inertia servo motor from the Q SANMOTION Servo Motors series with a flange size of 60mm and a rated output of 400W. It has a maximum rotation speed between 4500 and 5000 min-1 and features a 24V holding brake and a 200V supply voltage. This motor also includes reduced wiring incremental encoder sensor technology and meets CE and UL standards.
Internal Product Review
The Q1AA06040DCS01M is a Sanyo Denki Q SANMOTION low-inertia servo motor rated at 400 W for responsive motion control. A reduced wiring incremental encoder and 200 V motor supply support clean integration and stable command feedback in automated axes. A 24 V holding brake complements operation up to 5000 min-1, making the motor a strong choice for fast positioning duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Q1AA06040DCS01M is a servo motor manufactured by Sanyo Denki for the Q SANMOTION Servo Motors series. As a rotary actuator for industrial automation, it integrates into positioning stages, feeders, and compact gantries where rapid acceleration and tight velocity regulation are required. The motor belongs to the Q Series family, allowing it to operate with SANMOTION drives and feedback cables already standardized on many assembly lines.
A square flange measuring 60 mm simplifies direct attachment to small gearboxes and frames, while the motor delivers a continuous rated power of 400 W from a 200 V three-phase supply. Its low-inertia rotor reduces mechanical time constants, making the axis responsive during high-frequency start-stop cycles. Under commanded speed loops, the shaft can reach between 4500 and 5000 rpm, supporting short-stroke pick-and-place heads without overshoot. A 24 V electromagnetic holding brake is included to lock the shaft when power is off. Encoder options PP031, PP038, and PP062 provide selectable resolution, allowing the drive settings to accommodate the stiffness of the machine. All electrical components operate in ambient air from 0 °C to 40 °C, providing suitable thermal margins at the rated load.
The motor tolerates air humidity of up to 90% without condensation and complies with applicable CE and UL requirements for installation in equipment used in multiple regions. Feedback signals are generated by a reduced-wiring incremental encoder, which lowers the connector pin count and cable diameter while preserving diagnostic channels. Continuous operation within the specified 0 to 40 °C temperature range helps protect magnet adhesion. Varnished windings maintain insulation integrity when the motor is used in industrial environments where nearby equipment may undergo washdown cycles.
