QS1W05AM0XXXXC17 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki QS1W05AM0XXXXC17 is a servo amplifier from the Q SANMOTION Servo Amplifiers series with an amplifier capacity of 50 Amps and a built-in tray type power supply. It supports speed, torque, and position control, and features a 5-digit 7-segment LED display, built-in cooling fan, and dynamic brake. The amplifier also includes a built-in regeneration process and RS-232C setup port, and has a mass of 2.2 kg.
Internal Product Review
The QS1W05AM0XXXXC17 is a Sanyo Denki Q SANMOTION servo amplifier with Speed/Torque/Position control and an IGBT PWM sinusoidal drive. Built-in dynamic braking and 17 Ω regen resistance support stable deceleration and efficient energy handling in demanding motion applications. The 1:5000 speed control range makes the amplifier a strong choice for precise axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The QS1W05AM0XXXXC17 is a compact servo amplifier supplied by Sanyo Denki within the Q SANMOTION Servo Amplifiers series. Designed as the interface between a motion controller and a brushless servomotor, it converts low-level command signals into controlled three-phase power. In automated conveyors, pick-and-place gantries, or precision inspection tables, the unit closes the current, velocity, and position loops that keep axes synchronized with production sequences.
An output capability of 50 A lets the amplifier deliver high acceleration currents without exceeding its thermal margin. Current modulation uses an IGBT PWM sinusoidal drive bridge, providing smooth torque even at low speeds. The speed control range has a ratio of 1:5000, while the control bandwidth reaches 600 Hz; together, these values support delicate indexing and high-speed scanning on the same machine. Configuration is performed through an RS-232C setup port, and operating information is shown locally on a five-digit, seven-segment LED display. The amplifier can switch among speed, torque, and position control modes depending on the application. A built-in cooling fan removes heat generated by switching losses, while an internal dynamic brake works with the regeneration circuit to absorb energy during emergency stops. Motor leakage current is limited to 1.5 mA. The tray-type power supply structure also reduces wiring complexity inside the enclosure.
Energy returned from overhauling loads is dissipated through a 17 Ω regeneration resistor integrated into the drive motherboard, reducing the cabinet space otherwise required for an external brake chopper. Despite the integrated resistor, the amplifier has a mass of 2.2 kg, allowing installation on DIN rails or moving platforms with suitable support. The amplifier tolerates mechanical shocks of up to 5 G and continuous vibration of 0.5 G, allowing it to operate in enclosures near stamping presses, mobile robots, or other equipment that produces substantial mechanical movement. These resistance levels help the unit maintain stable control when surrounding machinery transmits vibration or intermittent impacts through the mounting structure.
