QS1V15AM0XXXXC14 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki QS1V15AM0XXXXC14 is part of the Q SANMOTION Servo Amplifiers series and features a 150 Amp amplifier capacity with a built-in dynamic brake and regeneration process. It supports a speed control range of 1 to 5000, uses an IGBT PWM sinusoidal drive control system, and offers three internal speed presets.
Internal Product Review
The QS1V15AM0XXXXC14 is a Sanyo Denki Q SANMOTION servo amplifier featuring an IGBT PWM sinusoidal drive and a built-in dynamic brake. The amplifier delivers impressive motion performance with a 600 Hz frequency response and a 1:5000 speed control range. Built-in regeneration and 150 A amplifier capacity make the amplifier a strong choice for demanding servo axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The QS1V15AM0XXXXC14 is a servo amplifier produced by Sanyo Denki for the Q SANMOTION Servo Amplifiers series. In an automation cell, this unit drives a matched servo motor by regulating phase current and voltage so axis speed and torque follow external commands. The amplifier forms the power stage between a motion controller and the motor windings, enabling precise acceleration, deceleration, and position holding in pick-and-place units, packaging lines, or electronic assembly machines.
Delivering up to 150 A of output current, the amplifier employs an IGBT PWM sinusoidal drive topology that minimizes harmonic distortion in the motor. Closed-loop speed regulation accepts an analog reference of ±10 V, while a separate speed command path uses DC ±2.0 V. The current input limit is DC ±2.0 V ±15%, which protects the control circuit. With a bandwidth of 600 Hz, the velocity loop maintains accuracy through fast load changes, and a speed control ratio of 1:5000 lets the motor turn from creep speed to rated rpm without cogging. Three internal speed presets simplify selection among fixed velocities. Built-in dynamic braking and a regeneration circuit dissipate excess energy during emergency stops.
System diagnostics are supported by separate feedback lines. The speed monitor delivers 2.0 V ±10% in proportion to actual motor speed, and both the speed and current monitor circuits present an impedance of 1 kΩ to avoid loading connected test equipment. Current feedback is scaled to 2.0 V ±10%, matching the speed monitor for consistent measurement. Motor insulation leakage current is limited to 3 mA, enabling use on equipment that follows touch-current safety thresholds. For torque shaping, the drive accepts a torque addition input of ±10 V and an independent torque command of DC ±2.0 V. These inputs allow feed-forward and closed-loop signals to be superimposed without saturation.
