QS1L01AU0XX0YPH3 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki QS1L01AU0XX0YPH3 is a servo amplifier from the Q SANMOTION Servo Amplifiers series and has an amplifier capacity of 15 Amps with a built-in dynamic brake and regeneration process. It uses an IGBT PWM sinusoidal drive control system, supports a frequency characteristic of 600 Hz, and operates with a speed control range of 1 to 5000. The amplifier weighs 1.25 kg and measures 168 mm in height, 45 mm in width, and 135.5 mm in depth.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The QS1L01AU0XX0YPH3 servo amplifier is produced by Sanyo Denki. It belongs to the Q SANMOTION Servo Amplifiers series. The amplifier sits between a motion controller and a SANMOTION servomotor, converting command signals into controlled current and voltage so the motor follows specified torque, velocity, or position profiles in automated machinery. This arrangement supports closed-loop motion in applications such as pick-and-place equipment, material-handling systems, and other coordinated production axes.
The output stage is rated for 15 A, giving the drive enough current for mid-frame servomotors used in pick-and-place axes. An IGBT PWM sinusoidal drive topology switches the main transistors so the motor windings receive a near-sine waveform, which lowers acoustic noise and heat. With frequency characteristics reaching 600 Hz, the velocity loop can respond to high-bandwidth commands. The input section accepts AC 200 V, allowing direct connection to a compatible factory power supply without a transformer. Cabinet space requirements are reduced by a width of 45 mm, while the depth is 135.5 mm for installation on shallow panels. A built-in dynamic brake stops the motor quickly, and an optional external regeneration resistor can be added when the connected mechanical load has high inertia. Main circuit terminals accommodate conductors equivalent to AWG 16.
The lack of a built-in cooling fan means the amplifier relies on natural convection, reducing the number of moving components that require maintenance. The overall height is 168 mm, and two slotted M4 mounting holes allow straightforward alignment on a mounting plate. With a mass of 1.25 kg, the unit places a relatively low mechanical load on the supporting panel. The drive maintains closed-loop accuracy across a 1:5000 speed control range, supporting slow jogging and rapid travel on the same axis. Regenerated energy is routed through the amplifier’s internal regeneration circuit during motor deceleration. The optional external regeneration resistor provides additional energy-dissipation capacity when the internal circuit is insufficient for the application.
