QS1L01AE0 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki QS1L01AE0 is part of the Q SANMOTION Servo Amplifiers series and supports a control function for speed, torque, and position. This amplifier has a capacity of 15 Amps and uses an IGBT PWM sinusoidal drive system. It features a built-in dynamic brake and regeneration process, with dimensions of 168 mm in height, 45 mm in width, and 160 mm in depth.
Internal Product Review
The QS1L01AE0 is a Sanyo Denki Q SANMOTION servo amplifier with 15 A amplifier capacity and AC 200 V input. IGBT PWM sinusoidal drive and speed, torque, and position control give the amplifier precise motion response across varied servo applications. A built-in dynamic brake supports dependable stopping performance, while the 1:5000 speed control range stands out for fine low-speed regulation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The QS1L01AE0 servo amplifier is manufactured by Sanyo Denki within the Q SANMOTION Servo Amplifiers series. This unit converts fixed-frequency mains power into a modulated three-phase output that the drive system uses to close speed, torque, and position loops. In automated assembly cells, it sits between the motion controller and the servomotor, issuing precisely timed current pulses so axes accelerate, hold, or decelerate as programmed. Built-in dynamic braking and regeneration hardware absorb surplus energy during rapid stops, reducing the need for external resistors and keeping cabinet layouts compact.
Designed for industrial machinery, the amplifier accepts a single-phase or three-phase supply at AC 200 V, which is the nominal voltage expected by the front-end rectifier and filter. Its power stage can deliver up to 15 A of continuous motor current, establishing the maximum torque that the connected servomotor can develop under a steady load. Pulse-width modulation is handled by an IGBT PWM sinusoidal drive topology that minimizes switching loss while producing a nearly sinusoidal phase current. Closed-loop velocity spans a ratio of 1:5000, so feed lines can move at diagnostic speeds and then ramp to full production speed without a hardware change. Current-loop operation is supported by frequency characteristics reaching 600 Hz, enabling the controller to react quickly to load disturbances in high-speed actuators.
The enclosure stands only 168 mm high, has a frontal width of 45 mm, and extends 160 mm deep, allowing dense side-by-side mounting in cabinets with a depth of 200 mm. Despite its compact footprint, the chassis weighs just 1.25 kg, so it can be installed on light-gauge DIN rail without additional bracing. Natural-convection cooling supports operation at ambient temperatures up to 55 °C and relative humidity up to 90%. Vibration resistance of 0.5 G and shock resistance of 5 G help protect internal solder joints under typical plant conditions. The built-in hardware keeps thermal loads localized and simplifies electromagnetic compatibility shielding.
