QH1L034B-01D

Product Description:

QH1L034B-01D is a Sanyo Denki servo amplifier. It is part of the H type product line from the Sanyo Denki Sanmotion Q series. Input of the amplifier is single-phase 200 to 230 Volts AC at 50/60 Hertz and 5 Amps is the input current. The amplifier output is 0 to 230 Volts and the output is three-phase. The output frequency can range from 0 to 420 Hertz. Current rating of the amplifier output is 2.9 Amps. CE marking and UL approval are a testament to the quality and design of the product, which allows its global use for a wide range for industrial applications. A heat sink is attached to the unit for improving heat dissipation during operation. The amplifier connects to a PC via an Ethernet interface located at the front side.

PC based software from Sanyo Denki allows configuration and monitoring to facilitate industrial use. A four segment LED display at the front panel provides important diagnostic information for amplifier operation. One USB interface and a communication interface are also provided at the front of the unit. A <. is attached to the side of the amplifier. It lists important information such as the risk of injury if the amplifier is handled when it is powered on. The label further states that operators should wait for 10 minutes after power is disconnected before working on the amplifier. Proper wiring is critical for proper amplifier operation. The ground connection on the amplifier must be connected to a low-resistance earth point for operator and equipment safety. High-voltage equipment such as the QH1L034B-01D amplifier are designed for professional handling by trained personnel who possess relevant industrial experience.