PQM0A100EXXYST0 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki PQM0A100EXXYST0 is a servo amplifier from the PQ Type M Servo Amplifiers series. It features a capacity of 100 Amps and supports speed control with a velocity control range of 1 to 3000. The amplifier has a built-in dynamic brake, uses 280 VDC input, and weighs 5.5 kilograms.
Internal Product Review
The PQM0A100EXXYST0 is a Sanyo Denki servo amplifier with 100 A amplifier capacity and speed control operation. Built-in dynamic braking and a 1:3000 velocity control range support stable response and strong tuning flexibility in motion applications. The 7-segment LED alarm display adds useful diagnostic visibility, and the PQM0A100EXXYST0 stands out as a strong choice for demanding drive systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PQM0A100EXXYST0 is a servo amplifier produced by Sanyo Denki within the PQ Type M Servo Amplifiers series. Acting as the power interface for closed-loop servomotor systems, it converts a fixed DC supply into controlled three-phase output so that a motion controller can command precise velocity or torque. In automated assembly stations, palletizers, and electronics-handling equipment, the unit supplies the regulated current needed for repeatable motor positioning. Its closed-loop operation allows the connected motor to maintain the commanded motion when operating conditions change.
The rated output current reaches 100 A, allowing the drive to energize medium-frame servomotors without exceeding its current capacity during acceleration. The control circuit operates in speed-control mode, so velocity feedback is closed internally while the host issues a speed reference. DC bus power is supplied at 280 VDC, a common rail voltage in multi-axis systems that simplifies power distribution and regenerative energy sharing. A built-in dynamic brake dissipates excess kinetic energy during deceleration. Fault conditions are reported on a 7-segment LED display, providing immediate diagnostic visibility. The regulation bandwidth supports a velocity ratio of 1:3000, allowing equipment to transition from slow alignment moves to high-speed transfers without changing the amplifier.
The aluminum chassis weighs 5.5 kg, which supports panel mounting without requiring heavy reinforcement. The amplifier withstands continuous ambient temperatures up to 131 °F during operation. Acceptable humidity reaches 90% RH, while conformal coating on the control boards protects circuits against moisture absorption. A shock resistance of 2 G protects internal components when the machine frame is jarred by tooling impacts. Operating altitude is limited to 1,000 m, and the operating temperature can fall to 32 °F without derating. During storage, the unit tolerates temperatures from -4 °F to 149 °F. These operating and storage limits accommodate installation in climate-controlled industrial facilities and storage in unconditioned warehouses.
