PMM-BA-5602
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The PMM-BA-5602 stepping driver offers AC 1500 V withstand voltage and automatic current reduction. The model features a photocoupler input system and 100 kpulses/sec maximum input frequency.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PMM-BA-5602 Stepping Driver ensures stable operation with automatic current reduction and low vibration. This driver supports multiple monitoring functions and offers reliable protection against driver overheating. It is ideal for industrial and automation applications.
The PMM-BA-5602 stepping driver features a photocoupler input system with 330 Ω input resistance. The maximum input frequency of this driver is 100 kpulses per second. The signals from power down input also use the same photocoupler system and voltage levels. The LED indicators display the power supply status, phase origin, pulse monitor and alarm status. Protection functions are in place to prevent PM driver overheating. The driver offers a relay contact alarm output with a normal open configuration. The contact capacity is rated at a maximum of 1 A at DC 24 V or 0.5 A at AC 120 V. The power input source is single phase AC 100/115 V with a tolerance of + 10 % and – 15 % operating at 50/60 Hz. The source current of the stepping driver is rated at 4 A. Withstand voltage of the model is specified at AC 1500 V for one minute without abnormalities between the power input terminal and the cabinet. The insulation resistance of the stepper motor driver must be no less than 10 MΩ when tested using a DC 500 V megohmmeter (Megger). This measurement should be conducted by applying the test voltage between the power input terminals (typically L and N or DC supply lines) and the chassis.
This Sanyo Denki PMM-BA-5602 stepping driver incorporates multiple selection functions including excitation mode selection, operation current adjustment and low vibration mode. These features help optimize motor control efficiency. The device is equipped with advanced monitoring functions using LEDs for real time status feedback.
Frequently Asked Questions about PMM-BA-5602:
Q: Does the PMM-BA-5602 stepping driver handle rapid input signals efficiently?
A: Yes, the PMM-BA-5602 stepping driver supports up to 100 kpulses per second input frequency. It ensures high-speed pulse processing without losing signal stability.
Q: How does the PMM-BA-5602 maintain insulation reliability under load conditions?
A: This model provides a minimum insulation resistance of 10 MΩ using a DC 500 V Megger. It keeps the power terminal and cabinet fully isolated under industrial operating conditions.
Q: Can the Sanyo Denki PMM-BA-5602 handle variable power fluctuations?
A: Yes, it operates on single-phase AC 100/115 V with a tolerance of +10 percent and –15 percent. It remains stable even under fluctuating voltage conditions.
Q: How does the PMM-BA-5602 prevent driver overheating in continuous operation?
A: It features an automatic current reduction and dedicated thermal protection function. These ensure safe operation during prolonged industrial use.
Q: Does the Sanyo Denki PMM-BA-5602 provide real-time operational feedback?
A: Yes, it uses LED indicators for power supply status phase origin pulse monitoring and alarm signals. These LEDs offer immediate visual diagnostics for system monitoring.
