PMM-MD-53031-10 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki PMM-MD-53031-10 is part of the PM Drivers series and weighs 0.31 kg. It features a control supply voltage of DC 5 V and a main supply current of 3 A, along with a CMOS input interface and a max input frequency of 400 kpulse per second. The driver has an insulation resistance of at least 10 megaohms and a withstand voltage of AC 500 V.
Internal Product Review
The PMM-MD-53031-10 is a Sanyo Denki PM driver with a CMOS input interface and a 400 kpulse/s maximum input frequency. A max microstep division of 250 and a DC 5 V ±5% control supply support precise, straightforward integration in motion systems. Electrical integrity remains impressive with 10 MΩ minimum insulation resistance and AC 500 V withstand voltage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PMM-MD-53031-10 is a pulse-modulated driver module produced by Sanyo Denki within the PM Drivers series. The unit converts logic-level step commands into phased current patterns for hybrid stepping motors, allowing precise positioning and velocity control in automated machinery and semiconductor handling lines. By separating motion generation from upper-level controllers, the driver simplifies wiring, isolates low-level logic from motor power, and supports repeatable microstepping. These capabilities make it suitable for motion stages, indexing tables, and pick-and-place equipment.
A dedicated control circuit operates from DC 5 V ±5% and draws a steady 0.15 A, allowing a compatible control supply to power the logic. The input interface is CMOS compatible, and each step command may arrive at rates up to 400 kpulse/s, enabling high-speed movement when the driver is paired with fine-pitch lead screws. To accommodate different resolution requirements, the drive supports a microstep table with 250 divisions. Reliable triggering requires a minimum pulse width of 1.25 µs at a 50% duty cycle. The internal counter provides 16 selectable resolution settings, allowing motion systems to balance smooth operation against command bandwidth.
The driver’s diagnostic circuit includes an open-collector transistor that can sink up to 5 mA and is rated for a maximum of 30 V, allowing status lines to interface with standard industrial sensors. Motor phase power is supplied by an external source capable of delivering 3 A, which accommodates typical NEMA 17 or NEMA 23 stepper motor requirements while keeping the thermal rise moderate. Mechanical installation is supported by 4 mm mounting holes and a total mass of only 0.31 kg, so the board can be secured directly to a suitable machine surface or moving carriage. Electrical isolation is verified by a dielectric withstand rating of AC 500 V. Insulation resistance exceeds 10 MΩ, supporting stable operation in factory environments with elevated humidity.
