PMM-MA-50064-10 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki PMM-MA-50064-10 is a driver from the PM Drivers series, designed for motor frames of 60 mm, 86 mm, or 106 mm. It supports a source current of 8 Amps at 100 V and 4 Amps at 200 V, with a power input of single-phase AC at 50 or 60 Hz. The unit weighs 1.3 kg and features a maximum input frequency of 100 kpulses per second.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PMM-MA-50064-10 is a pulse-train driver produced by Sanyo Denki for the PM Drivers series. It conditions control pulses from PLCs or indexing controllers and delivers phase current to hybrid stepping motors used in positioning stages, conveyors, and pick-and-place axes within automated equipment. By matching its output profile to permanent-magnet motor windings, the unit forms the electrical link between low-level motion commands and rotary actuation. This arrangement allows the driver to translate digital pulse sequences into controlled motor movement for industrial automation systems.
The driver accepts single-phase AC power at 50/60 Hz and draws up to 8 A at 100 V or 4 A at 200 V, allowing operation with common plant power supplies. Incoming step commands pass through a photocoupler interface with 330 Ω resistance, which isolates the control electronics and shapes the logic levels. Pulse rates can reach 100,000 pulses per second, keeping the motor responsive during high-speed indexing. The unit maintains full performance at altitudes up to 1,000 m, so no derating is required in most factory locations. Output position information is returned through open-collector signals rated for 30 V and 5 mA. Category 2 and Pollution 2 installation requirements apply, and the protection scheme corresponds to Class 1 equipment. Insulation resistance is at least 10 MΩ, providing electrical separation between the relevant circuits.
The driver supports motors with frame diameters of 60, 86, or 106 mm and can generate up to 250 internal microstep divisions. Its selectable pulse input mode supports either single-edge or double-edge counting, allowing the command format to match the connected controller. A vibration tolerance of 0.5 G permits installation on moving machinery, while the steel housing has a mass of 1.3 kg for panel mounting. Logic functions use a 16-count resolution register to track commanded steps during operation. The output stage has a dielectric strength of 1,500 VAC for one minute, providing resistance to electrical stress between isolated circuits.
Frequently Asked Questions about PMM-MA-50064-10:
Q: Which motor frame sizes are compatible with the PMM-MA-50064-10 driver?
A: The PMM-MA-50064-10 driver supports motors with frame sizes of Ø60, Ø86, and Ø106 mm.
Q: What power input does the PMM-MA-50064-10 require for operation?
A: This model's power requirements are single-phase AC at 50 or 60 Hz.
Q: What is the maximum input frequency supported by the PMM-MA-50064-10?
A: The maximum input frequency for the PMM-MA-50064-10 is 100 microseconds or 25 kpulses per second in automatic mode.
Q: What are the specifications for the output signals of the PMM-MA-50064-10?
A: The output signals are open collector type, rated for up to 30 V and 5 mA maximum current.
Q: What protection class does the PMM-MA-50064-10 driver provide?
A: The PMM-MA-50064-10 is protected as a Class 1 device, ensuring a basic level of user protection.
