PBM565DCC60 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The PBM565DCC60 is a servo motor from Sanyo Denki, part of the PB SANMOTION Servo Motors series. It features a 56 mm frame size, an overall length of 134.3 mm, and a shaft diameter of 10 mm. The motor is equipped with an electromagnetic brake rated at 24 VDC and has a protection rating of IP40.
Internal Product Review
The PBM565DCC60 is a Sanyo Denki PB SANMOTION servo motor with IP40 protection and an electromagnetic brake. A 200 P/R sensor resolution paired with C-phase output supports dependable feedback and clean integration in motion control assemblies. Strong electrical integrity, including 100 MΩ minimum insulation resistance, makes the unit a confident choice for stable servo service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PBM565DCC60 is a brushless servo motor produced by Sanyo Denki for the PB SANMOTION Servo Motors series. It integrates directly with pulse-train or analog drives to deliver commanded torque and position in industrial automation systems. Typical applications include pick-and-place heads, indexing tables, and compact conveyors that require controlled rotary motion. The integrated feedback system allows the connected drive to monitor rotor movement and regulate the motor during positioning and speed-control tasks.
The motor body has a frame width of 56 mm, and its output shaft measures 10 mm in diameter, allowing standard couplings and gearheads to be fitted without bushings. A centering land of 38.1 mm aligns the flange with the mounting surface. The housing length is 134.3 mm, which allows available installation clearance to be checked before mounting. The enclosure has an IP40 rating, providing protection against solid objects larger than 1 mm but no protection against water ingress. An electromagnetic brake is built in to hold the load when motor torque is disabled, and vibration endurance reaches 15 G during operation. The feedback section provides a C-phase output for commutation, while insulation resistance is rated at a minimum of 100 MΩ. The windings withstand 500 VAC at 50 or 60 Hz for one minute, providing electrical separation between the coils and frame.
Permitted ambient humidity ranges from 20% to 90% RH, provided that condensation is prevented during operation. The brake coil requires 24 VDC and engages to lock the rotor when the drive disables torque. Rotor position is reported by an incremental sensor that generates 200 P/R, providing feedback for mid-speed indexing and speed control. Mechanical survivability extends to an impact load of 30 G, helping the motor withstand brief shocks that may occur in industrial machinery. The compact frame and integrated brake support installations where mounting space is limited and the load must remain stationary after motor torque is removed. Appropriate enclosure placement is necessary where the motor could be exposed to liquids, conductive debris, or dust smaller than the protection afforded by its housing.
