PB4A002P301
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The PB4A002P301 is a servo driver designed for single or three-phase power input of 200 to 230 VAC at 50/60 Hz. Manufactured by Sanyo Denki, it is part of the PB SANMOTION Servo Drivers series and operates within an ambient temperature range of 0 to +55°C. With a mass of 0.65 kg, it supports rotational speeds up to 4500 min⁻¹.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
PB4A002P301 is a Sanyo Denki Sanmotion series servo driver. It is a Type P pulse train input device. It supports closed loop control via an encoder on the connected stepping motor. This reliable closed loop system provides higher efficiency and reliability compared to open loop control systems. The drive is an optimal choice for a wide array of applications that require low heat generation and low vibration. Typical applications include testing and analytical devices, searchlights, monitoring cameras and semiconductor manufacturing. The PB4A002P301 drive is designed for 200 to 230 Volts AC input (three phase, 50/60 Hertz). It is equipped with PWM control for sinusoidal drive. The power supply current rating is 4.5 Amps. Protection class of the unit is Class I. Sanyo recommends 0 to 55 degrees Celsius temperature for operation.
The specified temperature for drive storage is from -20 to 65 degrees Celsius. The maximum permitted operating ambient humidity is 90%. The maximum permitted storage ambient humidity is 90%. For rated output the site elevation should be 1000 meters or less. The tested dielectric strength of the PB4A002P301 drive is 1500 Volts AC for 60 seconds when tested between the power terminal and the frame. Resistance of insulation used on the device is 10 Megaohms. Shipping weight of this industrial device is approximately 0.65 kilograms. The driver can be used to control motors with 0 to 4500 RPM rotational speeds. It features integrated holding brake control function. A seven-segment LED display provides monitoring and diagnostics features. Digital operator functions include auto homing, forward direction, jog operation and S filter. The PC interface on the drive is RS-485 with start/stop synchronization and the supported baud rate is 115200 bps.
Frequently Asked Questions about PB4A002P301:
Q: What is the driver interface?
A: The driver interface is pulse train input.
Q: Which control method is used on the driver?
A: The driver is designed for PWM control.
Q: Does the driver support holding brake control?
A: The holding brake control function is built in.
Q: What type of display is available on the driver?
A: A 7-segment LED display is available.
Q: What is the protection class of the device?
A: Protection class of the device is Class I.
