P30B08075VXKAN Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B08075VXKAN servo motor is part of the P3 Super BL Servo Motors series and features brushless technology with a rated output of 750 W. This flange-type motor has an 80 or 86 mm flange size, a 16 mm shaft diameter, and a gear ratio of 1/10 with a spur gear. It is rated IP40 for protection and is designed for continuous operation.
Internal Product Review
The P30B08075VXKAN is a Sanyo Denki P3 Super BL servo motor rated at 750 W. The spur gear arrangement with a 1/10 gear ratio supports controlled speed reduction and steady torque transfer. Continuous duty and IP40 protection make the unit a strong choice for dependable industrial motion service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B08075VXKAN is a servo motor from the P3 Super BL Servo Motors series produced by Sanyo Denki. It is a brushless AC unit that uses a permanent-magnet excitation system to provide closed-loop speed and position control for automated machinery, positioning tables, and pick-and-place devices. Classified as a P3 motor, it is intended for continuous-duty applications that require precise torque regulation and a compact mechanical envelope. Its brushless design eliminates commutator wear, reducing the number of components subject to friction during operation.
The motor is built on a flange frame that measures 80 or 86 mm, and it mounts to equipment using the specified flange installation method. Its continuous rated output reaches 750 W, supplying moderate power while maintaining thermal stability without auxiliary cooling. A factory-integrated reduction stage uses a 1/10 ratio with a spur gear set, allowing increased torque at the driven component while keeping backlash low. The IP40 housing limits the entry of solid objects but does not provide protection against water, so the motor should be installed in a relatively clean and dry location. The motor has no holding brake, so an external load-holding device is required when the driven axis must remain stationary without motor torque. No shaft seal is fitted, which minimizes rotating inertia but requires protection against oil mist and coolant spray. The permanent magnets maintain the excitation field during the motor’s continuous operation.
Electrical isolation withstands 1,500 VAC for one minute between the windings and frame, while the insulation system maintains a resistance of at least 10 MΩ under standard test conditions. The solid steel output shaft has a diameter of 16 mm for direct coupling to gears or pulleys. Vibration performance complies with grade V15, indicating the permitted vibration level during normal service. The required flange-mount orientation supports stable attachment to the machine structure. Because the shaft does not include a seal, the bearing region must remain protected from contaminants that could enter around the output interface.
