Product Description:

The P30B08075DXS00M is a brushless AC servo motor produced by Sanyo Denki for the P3 Super BL Servo Motors series. As a closed-loop drive element, it delivers commanded position or velocity to machinery such as pick-and-place heads, indexing tables, and packaging axes in industrial automation cells. Compliance with CE and UL requirements permits installation in European and North American panels, while the IP40 housing suits clean, ventilated enclosures where only basic dust protection is required.

The motor supplies a power output of 750 W at a shaft speed of 3,000 rpm, producing a continuous torque of 2.38 N·m from a phase current of 4.6 Arms. Transient acceleration is possible up to a mechanical limit of 4,500 rpm. Phase resistance is 0.52 Ω, so the matched drive must provide adequate bus voltage to overcome the resistive voltage drop. A wiring-saving incremental encoder with 2,000 pulses per revolution reports rotor position through a single cable, reducing the connector count compared with separate feedback leads. The standard 80 or 86 mm square flange aligns with common gearboxes and machine frames. The motor has a mass of 3.3 kg, which supports straightforward handling during installation.

Dynamic behavior includes a peak stall torque of 7.15 N·m, allowing short bursts of torque in response to load disturbances. Current rise follows an electrical time constant of 8.3 ms, while rotor acceleration responds within a mechanical time constant of 0.3 ms to support rapid servo loops. The torque constant of 0.565 N·m/Arms links commanded current to output torque. A rotor inertia of 0.635 × 10⁻⁴ kg·m² helps minimize overshoot during reversals. Because no holding brake is fitted, static load retention must be handled by the drive or an external clamp. The brushless design eliminates mechanical brush wear during operation.