Product Description:

The P30B08075DXS00 is a brushless AC servo motor manufactured by Sanyo Denki for the P3 Super BL Servo Motors series. Intended for mid-power motion axes, it converts regulated three-phase power into precise rotational output for gantries, pick-and-place heads, and small packaging stations. When paired with a compatible Sanyo Denki drive, the motor supplies stable torque across its working speed range while requiring minimal installation space. Its brushless construction reduces maintenance demands and improves positioning repeatability compared with brushed designs.

The unit delivers 750 W of continuous mechanical power and produces a rated torque of 2.38 N·m when operated from a 200 VAC bus. The drive must supply 4.6 Arms to achieve this output, and the motor has a torque constant of approximately 0.565 N·m/Arms. Speed can be commanded up to 4500 rpm, enabling rapid indexing without requiring oversized gearheads. The internal windings have a phase resistance of 0.52 Ω, which helps control heat generation during steady operation. Position is measured by a wire-saving incremental encoder that outputs 2,000 pulses per revolution. The motor has a square flange measuring 80 or 86 mm, a 16 mm shaft, and an overall length of 140 mm. These dimensions simplify alignment with reducers and belt pulleys in compact machine frames.

The motor provides a continuous stall torque of 2.55 N·m and a peak stall torque of 7.15 N·m, allowing it to handle short acceleration bursts without saturating the windings. With a mass of 3.3 kg, the motor maintains moderate inertia and supports quick reversals in multi-axis stages. The motor follows Sanyo Denki’s standard format and is supplied without a holding brake, so vertical axes require an external clamp to prevent movement during a power loss. Its compact mounting footprint accommodates precision loads that require occasional overload capacity while maintaining acceptable operating temperatures.