P30B06040DXS22E Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B06040DXS22E is a brushless servo motor from the P3 Super BL Servo Motors series with a flange size of 60 mm and a mass of 1.7 kilograms. This motor provides a rated output of 400 watts, rated speed of 3000 min-1, and is CE certified with an IP40 protection rating. It is equipped with a wiring-saved incremental encoder and has a continuous stall torque of 1.372 N·m.
Internal Product Review
The P30B06040DXS22E is a Sanyo Denki P3 Super BL servo motor featuring brushless motor technology and a 400 W rated output. Rated torque of 1.274 N·m and max speed of 4500 min⁻1 give this unit strong motion-control capability for precise servo applications. CE certification and IP40 protection make the package especially appealing for clean industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B06040DXS22E is a brushless AC servo motor produced by Sanyo Denki and supplied under the P3 Super BL Servo Motors series. Designed for closed-loop positioning and speed control, the unit converts drive commands into regulated rotary motion for pick-and-place modules, indexing tables, and other industrial automation axes. Its internal architecture uses Sanyo Denki’s Super BL technology, which combines a low-loss stator with a wiring-efficient incremental encoder. This arrangement reduces wiring requirements while maintaining the feedback needed for accurate motion control.
During continuous operation, the motor delivers a rated mechanical output of 400 W at a shaft speed of 3000 rpm, corresponding to a rated torque of 1.274 N·m. When acceleration demands rise, the drive can apply up to 3.82 N·m of peak stall torque while drawing a peak phase current of 8.6 Arms. These operating limits are supported by a phase resistance of 1.4 Ω and an electrical time constant of 4.6 ms, allowing current to build rapidly without excessive copper loss. The continuous stall torque is 1.372 N·m, providing torque for holding a static load while the motor remains energized. A rated current of 2.7 Arms supports compatibility with suitable medium-power servo amplifiers. The rated power rate is 64.0 kW/s, indicating the motor’s ability to change power output quickly during dynamic motion cycles.
A square mounting flange of 60 mm simplifies integration with compact gearheads and slide actuators, while the unit’s mass of 1.7 kg helps limit the load placed on moving assemblies. The enclosure provides IP40 protection, so the motor should be installed in a clean enclosure when airborne oil, dust, or similar contaminants are present. A torque constant of 0.533 N·m/Arms provides a direct ratio between commanded current and developed torque for servo-drive tuning. The motor also conforms to CE requirements and uses a brushless design that avoids mechanical commutation components. Its rotor inertia is 0.255 × 10⁻⁴ kg·m², which affects acceleration response and controller gain settings. The motor does not include a holding brake, so an external holding device or drive-applied torque is required when a stationary load must be secured.
