P30B06020PXS1B Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B06020PXS1B is a brushless servo motor from the P3 Super BL Servo Motors series. It features a continuous stall torque of 0.98 N·m, rated output of 200 W, and a rated speed of 3,000 min⁻¹. The motor includes a wiring-saved incremental encoder with a resolution of 2,000 pulses per revolution and operates on a 100 V AC voltage class.
Internal Product Review
The P30B06020PXS1B is a Sanyo Denki P3 Super BL brushless servo motor with 200 W rated output and a 100 V AC voltage class. Rated speed of 3,000 min⁻¹ and maximum speed of 4,500 min⁻¹ give the motor a strong operating range for compact motion applications. The wiring-saved incremental encoder with 2,000 P/R resolution supports accurate feedback, making the motor a very capable choice for precise motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B06020PXS1B is a brushless servo motor manufactured by Sanyo Denki for the P3 Super BL Servo Motors series. Built on the company’s BL architecture, it is intended for closed-loop positioning and speed-regulated operation in compact automation axes and semiconductor handling tools. Its permanent-magnet rotor, low electrical inertia, and reduced-wiring incremental encoder allow the drive controller to execute rapid velocity corrections, making the unit suitable for applications that demand repeatable motion under tightly limited cycle times.
During rated operation, the motor produces 200 W of mechanical power at a shaft speed of 3,000 rpm while connected to a 100 V AC power stage. Under these conditions, it delivers a steady torque of 0.637 N·m, and its accelerative capability is indicated by a power rate of 29.0 kW/s. Internal copper loss is limited by a phase resistance of 0.39 Ω, while a torque constant of 0.151 N·m/Arms characterizes the motor’s electromagnetic coupling efficiency. The electrical time constant is 3.6 ms, permitting current loops in the drive to be tuned for high bandwidth. A reduced-wiring incremental encoder with 2,000 pulses per revolution supplies position feedback without requiring additional cabling. The induced voltage constant of 5.28 mV/rpm indicates the back electromotive force that the inverter must accommodate during operation.
The motor can exert a continuous stall torque of 0.98 N·m for static holding or low-speed indexing, and it tolerates transient acceleration up to a maximum speed of 4,500 rpm without reaching its overspeed limit. Armature excitation remains within the drive’s current range at 4.6 Arms, preserving thermal capacity when rapid reversals are commanded. A square flange measuring 60 mm simplifies mounting to compatible gearheads or precision stages. Because the model does not have a holding brake, mechanical clamping or drive-applied torque must secure vertical loads when required. The incremental encoder supports accurate position tracking while the control system is operating, but the axis may require a reference procedure after power is restored.
