P30B06020DXKS0 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B06020DXKS0 is part of the P3 Super BL Servo Motors series and uses brushless motor technology. It features a rated output of 200 W, a rated speed of 3,000 min-1, and a peak output torque of 11.4 N·m with a reduction ratio of 1/10. The motor has a flange size of 60 mm, a gearhead mass of 0.7 kg, and operates at a maximum speed of 4,500 min-1.
Internal Product Review
The P30B06020DXKS0 is a Sanyo Denki P3 Super BL servo motor with brushless motor technology and 200 W rated output. Rated speed of 3,000 min-1 and peak motor torque of 1.96 N·m give the assembly a strong balance of responsiveness and controlled acceleration. A 1/10 reduction ratio paired with 11.4 N·m peak output torque makes the unit a very capable choice for compact motion axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B06020DXKS0 is a gear-coupled servo motor manufactured by Sanyo Denki and supplied under the P3 Super BL Servo Motors series. It combines a brushless synchronous motor with a factory-matched reduction gearhead to deliver controlled rotary motion at low output speeds. In industrial automation, this type of assembly is selected to position tooling, index conveyors, or drive actuators where fast electrical response and elevated shaft torque are required without external belts or chains. The integrated arrangement also reduces the number of separate mechanical components needed between the motor and the driven load.
The motor produces a rated mechanical output of 200 W at a nominal speed of 3,000 rpm. At that operating point, the shaft delivers 0.637 N·m while drawing a rated phase current of 2.2 Arms from the drive. The brushless topology lowers rotor inertia and, together with a torque constant of 0.316 N·m/Arms, allows proportional torque generation across the speed range. For short duty cycles, the stator can accept a peak current of 7.5 Arms, enabling a momentary motor torque of 1.96 N·m and a maximum motor speed of 4,500 rpm without demagnetization. Copper losses are governed by a phase resistance of 1.5 Ω, so the drive must accommodate this impedance when current limits and thermal models are configured.
The integral gear reducer has a 1/10 ratio, translating the rated motor speed into an output speed of 300 rpm. Continuous loads can be driven with 5.7 N·m of shaft torque, while peak events can be accommodated with 11.4 N·m. These torque values account for a gear efficiency of 90%. The gearbox adds 0.7 kg to the assembly and aligns with machinery through a 60 mm flange inside an 82 × 82 mm housing envelope. Because the motor is supplied without a holding brake, an external mechanism is required when the load must remain stationary after power is removed.
