P30B06020DCL76 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B06020DCL76 is a brushless servo motor from the P3 Super BL Servo Motors series. It has a flange size of 60 mm, a rated output of 200 W, and a rated speed of 3000 min-1. The motor provides a continuous stall torque of 0.686 N·m and is equipped with a holding brake with a holding torque of 0.637 N·m.
Internal Product Review
The P30B06020DCL76 is a Sanyo Denki P3 Super BL servo motor with brushless motor technology and a rated output of 200 W. Rated operation at 3000 min-1 with 0.637 N·m torque supports smooth axis control and consistent servo response. Peak stall torque of 1.96 N·m gives the motor impressive overload capability for dynamic indexing duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B06020DCL76 is a brushless servo motor manufactured by Sanyo Denki for the P3 Super BL Servo Motors series. Built with permanent-magnet technology, the motor converts electrical current into precise shaft rotation for positioning tasks in industrial automation. Its square housing terminates in a 60 mm mounting flange, allowing direct attachment to gearboxes or load couplings without extra adapters. When installed with a dedicated drive, the motor can operate an axis in conveyors, pick-and-place heads, or vision-guided manipulators that require repeatable motion profiles and quick acceleration.
The integrated holding brake keeps the shaft fixed whenever control power is removed. The brake operates from a 24 V supply, draws 0.31 A, and produces 0.637 N·m of static holding torque. During motion, the stator winding resistance of 1.5 Ω helps determine current flow and winding losses. The amplifier can deliver a peak phase current of 7.5 A RMS for rapid torque surges during acceleration. The motor reaches a maximum speed of 4500 rpm, supporting applications that require fast rotary movement. Its electrical time constant is 3.8 ms, allowing the winding current to respond quickly to commands from the drive.
For continuous duty, the rotor operates at 3000 rpm and produces 0.637 N·m of torque while drawing 2.2 A RMS. A stall torque of 0.686 N·m provides additional capacity against static loads, while 1.96 N·m is available during brief overload conditions. The motor has a torque constant of 0.316 N·m/A RMS, allowing the drive controller to calculate expected torque from the commanded current. A mechanical time constant of 0.63 ms supports responsive acceleration and short settling periods in automated motion systems. The motor has a rated power output of 200 W, which is suitable for compact positioning axes and other moderate-load applications. Gear ratios, connected inertia, duty cycle, and available cooling should be considered when the motor is integrated into a machine.
