P30B06010DXS8SM Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B06010DXS8SM is a 100 W brushless servo motor from the P3 Super BL Servo Motors series, featuring a permanent magnet excitation system and a self-cooling method. It is rated for 200V AC, supports a maximum speed of 4500 min-1, and comes with a 60 mm flange size. The motor has an IP40 protection rating, uses a wiring-saved incremental encoder with a resolution of 2,000 P/R, and holds CE and UL certifications.
Internal Product Review
The P30B06010DXS8SM is a Sanyo Denki brushless servo motor with 100 W rated output. Self-cooling design and IP40 protection support dependable operation in enclosed automation assemblies. The wiring-saved incremental encoder with 2,000 P/R resolution gives the motor precise feedback and makes the package especially appealing for clean, efficient motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B06010DXS8SM is a brushless servo motor manufactured by Sanyo Denki for the P3 Super BL Servo Motors series. As a permanent-magnet unit, it provides closed-loop speed and position control for compact actuators and light-duty axes that require repeatable motion in automated equipment. Its brushless construction eliminates brush wear, and the wiring-saving incremental encoder simplifies cable routing to the drive while supplying feedback for motion controllers in packaging, semiconductor handling, and small material-transfer stations.
This model produces a continuous mechanical output of 100 W, providing sufficient shaft power for indexing loads while keeping thermal rise low. Operation is based on the 200 V AC supply class, so the motor pairs with a compatible servo drive connected to standard factory power. Rotor speed can be commanded up to 4500 rpm, supporting fast point-to-point moves in applications with short cycle times. Position data are generated by a 2,000-pulse-per-revolution incremental encoder, allowing the drive to resolve 0.18° at the motor shaft before interpolation. The IP40 housing protects internal windings from solid objects larger than 1 mm while permitting natural convection. The motor is rated for continuous duty and relies on self-cooling airflow rather than forced ventilation. UL and CE markings indicate compliance with applicable safety requirements for insulation and electrical clearances. No holding brake is fitted, so static holding force must be supplied by the drive or an external mechanism when the axis is stationary.
A square flange measuring 60 mm aligns the shaft with compatible gearheads and machine mounting plates. The motor has a dielectric strength of 1,500 VAC for one minute, providing coil isolation during temporary voltage stress. Winding insulation has a resistance of at least 10 MΩ at 500 V DC, indicating low leakage current through the insulation system. The motor carries a vibration rating of V15, which limits vibration transmitted to nearby couplings, sensors, and machine components. These operating characteristics support installation in compact automated systems where space, feedback accuracy, and continuous operation are important.
