P30B04010PXKST Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B04010PXKST is a brushless servo motor from the P3 Super BL Servo Motors series. It provides a rated output of 100 W, operates at a maximum speed of 4,500 per minute, and has a voltage class of 100 VAC. The motor features a flange size of 40 or 42 mm, IP40 protection rating, and is made with a permanent magnet excitation type.
Internal Product Review
The P30B04010PXKST is a Sanyo Denki P3 Super BL servo motor that uses brushless motor technology and permanent-magnet excitation. Continuous-duty operation and 100 W rated output give the motor an impressive balance of consistency and usable power for precise motion service. IP40 protection adds installation confidence, while the 4,500 min⁻¹ maximum speed is a strong performance highlight.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B04010PXKST servo motor is manufactured by Sanyo Denki for the P3 Super BL Servo Motors series. This brushless device serves as the actuating element in compact automation axes, supplying precise torque and speed control to feeders, laboratory mechanisms, and small-scale robotic systems. When connected to a compatible servo amplifier, it converts modulated current into rotational motion. Feedback sensors allow the controller to maintain the shaft position and follow commanded motion profiles as the applied load changes.
The motor provides a continuous mechanical output of 100 W, making it suitable for light conveying and indexing duties without external cooling. A maximum rotational speed of 4,500 rpm permits rapid cycle times when an application requires short, fast movements. The stator windings are designed for the 100 VAC class, allowing the motor to operate with a compatible low-voltage servo amplifier. A Type F insulation system supports winding temperatures up to 155 °C during sustained operation. The IP40 enclosure prevents solid objects larger than 1 mm from entering the housing, but it does not protect the motor against water. Installation in a clean, dry location helps prevent contamination or moisture from reaching internal components.
The magnetic circuit uses permanent-magnet excitation, eliminating the need for field wiring and supporting responsive acceleration and deceleration. The insulation between the coils and frame withstands 1,500 VAC for one minute, providing electrical isolation between energized windings and the motor housing. The mounting flange measures 40 or 42 mm, allowing the motor to fit compatible miniature gear reducers and linear actuators. Dynamic balance meets the V15 vibration grade, which helps limit vibration as the rotor approaches its maximum speed. The motor does not include a holding brake, so an external mechanism or drive-applied torque must retain stationary loads when necessary. It is also supplied without an oil seal and should not be exposed to lubricants or other liquids at the shaft opening. Its continuous time rating permits uninterrupted operation when the applied load remains within the motor’s thermal and mechanical limits.
