P30B04010DXSSEM Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B04010DXSSEM is a brushless servo motor from the P3 Super BL Servo Motors series featuring a rated output of 100 watts and a rated speed of 3000 min-1. It has a continuous stall torque of 0.353 N·m, a rated current of 1.1 Arms, and utilizes a wiring-saved incremental encoder. The motor has a flange size of 40 or 42 mm and operates on a 200 VAC voltage class.
Internal Product Review
The P30B04010DXSSEM is a Sanyo Denki brushless servo motor rated at 100 W with a 200 VAC voltage class. Rated torque of 0.32 N·m and rated speed of 3000 min-1 support stable, efficient motion control in compact servo axes. A wiring-saved incremental encoder simplifies feedback integration, and 0.98 N·m peak stall torque stands out for dynamic positioning performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Sanyo Denki supplies the P30B04010DXSSEM as part of its P3 Super BL Servo Motors series. Classified as a brushless AC servo motor, the unit converts drive commands into precise shaft motion for indexing tables, pick-and-place axes, and other automated stations that require compact equipment. The Super BL design minimizes rotor inertia, allowing tight position control while maintaining sufficient thermal capacity for continuous operation in industrial automation systems.
The motor delivers a continuous shaft output of 100 W at a rated torque of 0.32 N·m and a rated speed of 3000 rpm while drawing 1.1 A RMS from the drive. When holding a load at standstill, the stator can continuously produce 0.353 N·m without exceeding the permitted Class B temperature rise. The motor has a torque constant of 0.292 N·m per ampere, an armature resistance of 4.3 Ω, and an electrical time constant of 1.4 ms. Its mechanical time constant of 0.7 ms supports rapid acceleration during short-stroke movements. Feedback is provided by a wiring-saving incremental encoder that reduces the number of required conductors. A 40/42 mm square flange supports mounting to miniature gearboxes and compact machine assemblies. The motor is supplied without a holding brake, so an external mechanism or drive-applied torque is required when a stationary load must be secured. It carries CE and UL marks for use in applicable industrial installations.
The motor reaches a maximum speed of 4500 rpm when the controller supplies up to 4.1 A RMS. During short acceleration periods, it can produce a maximum stall torque of 0.98 N·m to overcome inertial or frictional loads. Continuous stall current is limited to 1.3 A RMS to control winding temperature during extended operation at zero speed. The motor is intended for operation with a 200 VAC servo drive, matching a common industrial power class. Its brushless construction eliminates commutator wear and reduces routine maintenance associated with mechanical electrical contacts. The incremental encoder provides the drive with the position information needed to regulate shaft speed and movement throughout repeated operating cycles.
