P30B04010DXS1CM Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P30B04010DXS1CM is a brushless servo motor from the P3 Super BL Servo Motors series, featuring a 40 or 42 mm flange and an IP40 protection rating. It provides a rated output of 100 watts, a rated speed of 3,000 min-1, and uses a wiring-saved incremental encoder with a resolution of 2,000 P/R. The motor delivers a continuous stall torque of 0.353 N·m and is certified for both CE and UL standards.
Internal Product Review
The P30B04010DXS1CM is a P3 Super BL servo motor with brushless construction and a 100 W rated output. A wiring-saved incremental encoder with 2,000 P/R resolution supports accurate feedback and clean control response. Max stall torque of 0.98 N·m gives the motor strong dynamic capability for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P30B04010DXS1CM is a brushless servo motor produced by Sanyo Denki as part of the P3 Super BL Servo Motors series. Designed for positioning and speed-control tasks in compact automation axes, the unit combines a permanent-magnet rotor with an incremental encoder, allowing the drive to maintain high-resolution feedback loops. The motor delivers repeatable torque in a small frame while minimizing the maintenance associated with brushed designs.
The motor has a rated output of 100 W at a rated speed of 3,000 rpm. At this operating point, the shaft produces 0.32 N·m of torque while drawing a rated armature current of 1.1 A RMS. The IP40 enclosure protects the windings against solid objects larger than 1 mm, so the motor is intended for clean, enclosed installations without exposure to water. The reduced-wiring incremental encoder provides 2,000 pulses per revolution, allowing the controller to resolve 0.18 degrees per count. Its electrical time constant of 1.4 ms permits a rapid current rise with controlled response. A torque constant of 0.292 N·m/A RMS relates commanded current to output torque, while the 4.3-ohm phase resistance contributes to winding losses during operation.
For transient demands, the motor can accelerate to a maximum speed of 4,500 rpm and briefly accept a peak winding current of 4.1 A RMS. During sudden load changes, the magnetic circuit can sustain a continuous stall torque of 0.353 N·m or reach a breakaway torque of 0.98 N·m. The continuous stall current is 1.3 A RMS for steady-state operation at zero speed. The motor does not include a holding brake, so an external mechanism or drive-applied torque is required when a stationary load must be secured. CE and UL compliance supports integration into applicable control panels, while the 40 mm square flange accommodates compact gearheads and mounting plates.
