GAM2A6010F0XNK2 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki GAM2A6010F0XNK2 is part of the G SANMOTION AC Servo Motors series. This motor has a rated output of 0.1 kW, a rated speed of 3000 min-1, and a rated torque of 0.318 N·m. It features a single-turn absolute encoder with 23-bit resolution and offers IP67 ingress protection, while weighing 0.59 kg.
Internal Product Review
The GAM2A6010F0XNK2 is a Sanyo Denki G SANMOTION AC servo motor rated at 0.1 kW and 3000 min-1. Control performance looks strong for precision axes, with a 23-bit single-turn absolute encoder supporting accurate position feedback. IP67 protection and 1.13 N·m peak stall torque make the motor a very capable choice for compact industrial servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GAM2A6010F0XNK2 is a permanent-magnet AC servo motor manufactured by Sanyo Denki within the G SANMOTION AC Servo Motors series. It operates from a 200 VAC drive and converts commanded currents into precise rotary motion for automated assembly, inspection, and light-material-handling stations. Serving as the electromechanical interface in these machines, the motor supplies repeatable speed and position control so that small conveyors, pick-and-place heads, or indexing tables follow programmed trajectories without mechanical cams.
The motor delivers 0.1 kW of continuous mechanical power at its rated speed of 3000 rpm. At this operating point, the shaft produces a nominal torque of 0.318 N·m, which is adequate for overcoming process loads while maintaining velocity stability. For transient events such as rapid acceleration or sudden load impact, the electromagnetic system tolerates a peak stall torque of 1.13 N·m. When the rotor is commanded to hold position, it can continuously sustain 0.353 N·m without exceeding thermal limits. These torque values are achieved with a rated armature current of 1.02 Arms supplied by the amplifier, allowing appropriate sizing of conductors and protection devices.
A single-turn absolute encoder with 23-bit resolution provides feedback through 8,388,608 discrete positions per revolution for fine commutation and high-accuracy positioning. The stator phase resistance of 5.3 Ω assists the drive in regulating current during startup and fault recovery. The housing is sealed to IP67, protecting the motor against dust and temporary water immersion. The keyed output shaft is supplied without an oil seal, simplifying its connection to gears or pulleys in applications where an additional shaft seal is unnecessary. Low rotor inertia of 0.143 × 10-4 kg·m² supports quick reversals, while a total mass of 0.59 kg keeps moving structures light for faster machine dynamics.
