GAM2A4015V0XRK1 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki GAM2A4015V0XRK1 is part of the G SANMOTION AC Servo Motors series and has a body length of 85.5 mm with a shaft diameter of 8 mm. The servo motor delivers a rated output of 0.15 kW with a rated speed of 3000 min-1 and features IP67 ingress protection. It uses a battery-less absolute encoder with a resolution of 23 bit and weighs 0.50 kg.
Internal Product Review
The GAM2A4015V0XRK1 is a Sanyo Denki AC servo motor that delivers 0.15 kW rated output at 3000 min-1 rated speed. A 23-bit battery-less absolute encoder gives this unit precise feedback and low-maintenance position retention. IP67 protection adds strong application flexibility, while 1.7 N·m peak stall torque stands out as a key performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GAM2A4015V0XRK1 is an AC servo motor manufactured by Sanyo Denki for the G SANMOTION AC Servo Motors series. Integrated into a drive system, it supplies precise rotational motion that allows machine controllers to position loads quickly and repeatably. This controlled response supports electronic assembly cells, inspection gantries, and light-duty material-handling stations.
This model is designed for a supply of 200 VAC, so it connects directly to standard industrial servo drives without step-down conversion. At its continuous operating point, the shaft delivers 0.15 kW of mechanical power while turning at 3000 rpm. The corresponding steady torque is 0.48 N·m, which is suitable for moving low-inertia indexing tables or belt sections with minimal overshoot. Copper losses are moderated by a phase winding resistance of 8.0 Ω, and the drive must supply only 1.20 Arms to maintain the rated operating point. The housing is 85.5 mm long, which allows installation where axial space is limited. Its mass of 0.50 kg reduces the payload on moving axes, while the 8 mm output shaft connects directly to compact couplings.
An enclosure rating of IP67 protects the stator against dust and temporary submersion, permitting operation near packaging lines that require washdown. Position feedback comes from a battery-free absolute encoder with a resolution of 23 bits, eliminating battery maintenance while providing 8,388,608 discrete counts per revolution. During acceleration, the motor can resist load stalling with a peak torque of up to 1.7 N·m. Its electromagnetic design provides a torque constant of 0.441 N·m/Arms, allowing the drive to calculate output torque from measured current. The lightweight rotor has a moment of inertia of 0.0876 × 10⁻⁴ kg·m², allowing rapid speed changes during short positioning cycles. This low rotor inertia also helps the motor respond quickly to changing motion commands without placing excessive demand on the connected mechanism.
