GAM2A4015V0XNK1 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki GAM2A4015V0XNK1 is part of the G SANMOTION AC Servo Motors series and features a 40 mm square flange with a circular output shaft and no key. It operates at 200 VAC input voltage, delivers a rated output of 0.15 kW, and has a rated speed of 3000 revolutions per minute. The single-turn absolute encoder provides a resolution of 23 bits, and the motor has a peak stall torque of 1.7 Newton-meters.
Internal Product Review
The GAM2A4015V0XNK1 is a Sanyo Denki G SANMOTION AC servo motor with 200 VAC input and 0.15 kW rated output. A 23-bit single-turn absolute encoder supports accurate positioning and dependable feedback in servo axis applications. Rated torque of 0.48 N·m with peak stall torque of 1.7 N·m gives this motor strong dynamic response for demanding motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GAM2A4015V0XNK1 is an AC servo motor manufactured by Sanyo Denki within the G SANMOTION AC Servo Motors series. It is designed for closed-loop motion tasks in industrial automation, where compact dimensions and quick response are needed. Typical applications include small conveyor stations, indexing tables, and multi-axis assemblies that require controlled positioning or speed regulation. The motor converts drive current into precise rotary motion while its feedback system allows the connected servo drive to correct position and velocity errors.
This model operates from a single-cable power feed of 200 VAC, allowing it to connect to compatible servo drives that use the same bus voltage. At its continuous operating point, the shaft delivers 0.15 kW of mechanical power at 3000 rpm. The continuous torque at that operating point is 0.48 N·m, produced with a phase current of 1.20 Arms. Coil heating is limited by a phase resistance of 8.0 Ω, while a torque constant of 0.441 N·m/Arms converts current into usable shaft torque. These electrical characteristics support controlled torque production during steady motion and repeated acceleration cycles without requiring an oversized motor frame.
The motor can produce a peak stall torque of 1.7 N·m for short acceleration periods or brief shock loads. Position feedback is supplied by a single-turn absolute encoder with a resolution of 23 bits, providing approximately 8.4 million counts per revolution for fine interpolation. Because the encoder retains the absolute position within one mechanical revolution, the axis does not require a homing routine after every power cycle. The rotor inertia is 0.0876 × 10⁻⁴ kg·m², which supports fast current-controlled torque changes with limited overshoot. An oil seal at the front bearing helps prevent lubricant migration along the output shaft. The circular shaft has no keyway, so clamping collars or precision couplings are suitable for transmitting torque. A 40 mm square flange follows IEC mounting patterns and provides a compact mechanical interface for installation in space-restricted equipment.
