GAM2A4010F0XNK0 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki GAM2A4010F0XNK0 is part of the G SANMOTION AC Servo Motors series and features a flange size of 40 mm square with IP67 ingress protection. It has a rated output of 100 W, a rated speed of 3000 min^-1, and uses a 23-bit single-turn absolute encoder. The servo motor operates at a rated current of 0.99 Arms and provides a peak stall torque of 1.18 N·m.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GAM2A4010F0XNK0 is an AC servo motor manufactured by Sanyo Denki within the G SANMOTION AC Servo Motors series. This 40 mm-frame unit converts electrical power into precise rotary motion for positioning tables, pick-and-place heads, and compact packaging axes in industrial automation. Its compact frame allows installation in machinery with limited space around the driven axis.
At its continuous rating, the motor produces 100 W while turning at 3000 rpm and delivering 0.318 N·m of torque. The motor draws 0.99 Arms from a 200 VAC three-phase source, helping limit heat within the electrical enclosure. The 40 mm square flange simplifies installation on compact machine frames and mounting plates. A rotor inertia of 0.0600 × 10⁻⁴ kg·m² supports rapid starts with minimal overshoot during short positioning cycles. Closed-loop control is provided by a single-turn absolute encoder that reports the shaft position immediately after power-up. The low current draw allows multiple axes to operate from appropriately sized drive systems. Modest rotor inertia also helps velocity loops settle quickly, reducing the dwell time between successive movements.
For short bursts, the shaft withstands 1.18 N·m of peak stall torque, allowing the motor to overcome brief increases in mechanical load. The maximum operating speed reaches 6500 rpm for fast indexing routines that require rapid shaft movement. Feedback resolution is 23-bit, providing more than eight million discrete position counts per revolution. An IP67 housing blocks dust and withstands temporary immersion even though the motor does not have an external oil seal. This arrangement allows the motor to connect to gearheads that provide their own lubrication barrier. Operation above the continuous-speed point is intended for intermittent motion profiles because iron and copper losses increase as speed rises. The lack of an external oil seal reduces shaft drag, supports high acceleration, and removes a potential wear component. Its sealed housing is suitable for washdown areas where dust and water exposure are expected during normal machine operation.
