GAM1A4010F0XNK0 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki GAM1A4010F0XNK0 is a servo motor from the G SANMOTION AC Servo Motors series with a rated output of 0.10 kW and a rated speed of 3000 min-1. It features a 23-bit encoder resolution of 8,388,608, a shaft diameter of 8 mm, and an IP67 protection rating. The motor provides a peak stall current of 4.1 Arms and a rated torque of 0.318 N·m.
Internal Product Review
The GAM1A4010F0XNK0 is a Sanyo Denki SANMOTION AC servo motor rated at 0.10 kW with a rated speed of 3000 min-1. High-resolution feedback from the 23-bit encoder and a 4.0 Mbps encoder baud rate supports precise tuning and stable motion control. IP67 protection and 1.18 N·m peak stall torque make this unit a strong choice for demanding servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GAM1A4010F0XNK0 is an AC servo motor supplied by Sanyo Denki within the G SANMOTION AC Servo Motors series. It is built for closed-loop positioning and speed control in industrial automation lines, where its compact dimensions and sealed housing allow it to be mounted directly on machinery without extra guarding. The motor converts electrical energy into regulated mechanical rotation, allowing compatible drives to command precise motion profiles for pick-and-place axes, small conveyors, and indexing tables.
This model delivers 0.10 kW of continuous mechanical power at a rated speed of 3000 rpm, producing an output torque of 0.318 N·m while drawing a rated armature current of 1.0 A rms. When rapid acceleration is required, the drive may supply a peak stall current of 4.1 A rms, allowing the motor to reach a peak stall torque of 1.18 N·m for brief periods. A 4.0 Mbps serial encoder with 23-bit resolution provides 8,388,608 counts per revolution and returns absolute shaft position to the controller for precise closed-loop motion. Electrical losses are limited by a phase resistance of 6.9 Ω, while a motor length of 93.5 mm and an 8 mm shaft diameter keep the package compact enough for installation in confined machinery.
For continuous load holding, the motor can supply a stall torque of 0.353 N·m with a stall current of 1.05 A rms, supporting applications that require constant torque at zero speed. A torque constant of 0.372 N·m/A rms links the commanded current directly to the developed torque, simplifying current-loop adjustment in the drive. The housing has a protection rating of IP67, preventing dust ingress and withstanding temporary immersion. This sealed housing supports operation in areas exposed to washdown, coolant mist, or other conditions where moisture could reach an unprotected motor.
