GADSE03LA22 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
18 Seconds
The Sanyo Denki GADSE03LA22 is part of the G Sanmotion AC Servo Amplifiers series and has a maximum motor output of 1.5 kW with an amplifier capacity of 30 Amps. It features single-phase 100 VAC input, a peak output current of 16.3 Arms, and a continuous output current of 5.2 Arms. The unit has a mass of 0.90 kg and supports a velocity control range of 1 to 5000.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GADSE03LA22 servo amplifier is produced by Sanyo Denki for the G Sanmotion AC Servo Amplifiers series. Designed for industrial automation, it accepts encoder feedback and modulates three-phase motor windings so an attached AC servo motor can accelerate, brake, or hold its position under digital control. By converting low-power command signals into controlled current, the amplifier forms the interface between a motion controller and the mechanical axis. It supports applications such as semiconductor handlers, packaging lines, and assembly robots that require regulated motion and repeatable positioning.
The unit operates from a 100 VAC single-phase supply and has an overall amplifier capacity of 30 A, which indicates the maximum instantaneous bus current it can process. During steady operation, it delivers a continuous output of 5.2 A rms to the motor, while short acceleration bursts may draw up to 16.3 A rms without exceeding thermal limits. The separate control circuitry requires only 0.3 A rms, so logic power can be supplied through light-duty wiring. A 1.5 kW motor can be driven by this amplifier when a minimum external shunt resistance of 10 ohms is connected to the braking terminals. The regenerative resistor is mounted outside the housing. Outputs to field I/O use a sinking GPO format for connection to compatible NPN control circuits.
The amplifier draws up to 2.4 kVA at full load, so branch protection and supply wiring must accommodate its maximum power demand. Its velocity control range is 1:5000, allowing fine speed regulation from low-speed movement to the motor’s base speed. The mechanical system can accommodate a load of up to 10 times the rotor inertia while maintaining servo stability when the axis is configured correctly. The aluminum chassis weighs 0.90 kg, which reduces the mounting load within the control assembly. The unit withstands vibration levels of 6 m/s² and shock levels of 20 m/s² encountered in modular industrial machinery.
