GADSE03AH24 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki GADSE03AH24 is a servo amplifier in the G Sanmotion AC Servo Amplifiers series. It supports a single-phase 100 VAC voltage class and has a power capacity of 2.4 kVA. The amplifier offers a continuous output current of 5.2 Arms and a peak output current of 16.3 Arms, with a maximum motor output of 1.5 kW.
Internal Product Review
GADSE03AH24 is a Sanyo Denki G Sanmotion AC servo amplifier designed for single-phase 100 VAC systems. Continuous output current of 5.2 Arms and peak output current of 16.3 Arms give the unit strong drive capability for precise servo applications. A 1:5000 velocity control range makes this amplifier a very capable choice for accurate motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GADSE03AH24 is an AC servo amplifier manufactured by Sanyo Denki for the G Sanmotion AC Servo Amplifiers series. In an automation cell, the unit receives single-phase mains power and modulates it according to commands from a motion controller. It then supplies proportional current to a matched servo motor, enabling accurate positioning and speed regulation in automated machinery. The single-phase input also supports installations where three-phase electrical service is unavailable.
The amplifier can deliver up to 30 A of instantaneous drive current, while a continuous rating of 5.2 Arms supports normal operating loads without sustained overheating. Transient acceleration demands are handled by a peak output of 16.3 Arms. The amplifier supports a maximum motor shaft output of 1.5 kW, providing power for demanding positioning and speed-control tasks. The power section has an apparent input rating of 2.4 kVA, and the 100 VAC line is protected by an overvoltage category III design. A single-phase supply must provide at least 10 ohms of external resistance to limit inrush current when the amplifier is energized. During motor deceleration, the regeneration circuit can dissipate 60 W of excess energy through an internal 10-ohm resistor. This arrangement limits voltage rise on the internal bus and reduces electrical stress on upstream wiring and braking components.
The drive operates in the 100 VAC voltage class and maintains velocity regulation across a 1:5000 speed range, allowing precise low-speed indexing and rapid traverse from the same amplifier. The permitted relative humidity reaches 95% RH without condensation, supporting operation in humid industrial areas when moisture does not collect inside the enclosure. Installation is permitted at altitudes up to 2000 m before derating is required. The panel-mounted amplifier can withstand vibration exposure of up to 6 m/s² during operation. It also tolerates shock loads of up to 20 m/s², helping protect the internal control electronics from brief mechanical impacts during handling or machine operation.
