GADSA10AH24 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
37 Seconds
The Sanyo Denki GADSA10AH24 is part of the G Sanmotion AC Servo Amplifiers series and features a 100 A amplifier capacity with a maximum motor output of 5.0 kW. It operates on a 200 VAC input voltage class, has a continuous output current of 24.0 Arms, and supports position, speed, and torque control functions. The amplifier uses an IGBT-based sinusoidal PWM control system and has a mass of 3.4 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GADSA10AH24 is a servo amplifier from the G Sanmotion AC Servo Amplifiers series produced by Sanyo Denki. It interfaces between a motion controller and a three-phase servo motor, delivering regulated current to meet position, speed, and torque commands in automated machinery. By combining an IGBT-based sinusoidal PWM topology with digital control, the unit supplies high-bandwidth motor drive signals while maintaining a compact size for cabinet installation.
The amplifier is rated for an output capacity of 100 A. During continuous operation, the unit supplies 24.0 Arms, and transient demands are supported by a peak current limit of 55.0 Arms. A 200 VAC input class aligns the converter with standard factory power systems, while the internal rectifier draws 24.7 Arms at nominal load. With this input, the drive can energize motors rated up to 5.0 kW without derating. The control loops support position, speed, and torque modes for a range of motion applications. The allowable load inertia extends to ten times the rotor inertia, allowing larger mechanical loads to be coupled while preserving control stability. The overvoltage category is III, making the amplifier suitable for fixed equipment connected to industrial power distribution systems. Shock resistance is rated at 20 m/s², and vibration tolerance reaches 6 m/s² for operation on moving frames or near heavy machinery.
Total power supply demand is 9.4 kVA, which helps determine transformer and breaker requirements in the control panel. Excess kinetic energy is dissipated through an internal braking circuit with a resistor value of 6 Ω, preventing DC-bus surges during rapid deceleration. Closed-loop velocity regulation spans a wide 1:5000 range, enabling precise low-speed indexing and high-speed traverses with the same motor. The amplifier weighs 3.4 kg, which reduces panel load and simplifies handling during installation. An IGBT switching platform supports the sinusoidal PWM system, producing smooth motor torque across the operating speed range.
