GADSA02AH24 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki GADSA02AH24 is an AC servo amplifier from the G Sanmotion AC Servo Amplifiers series. It has a maximum motor output of 400 W and supports an input voltage range of 200 to 240 VAC. The unit offers a continuous output current of 3.1 Arms, a peak output current of 12.0 Arms, and weighs 0.80 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The GADSA02AH24 servo amplifier from Sanyo Denki belongs to the G Sanmotion AC Servo Amplifiers series and supplies regulated current to a servomotor in industrial automation systems. It accepts mains power, processes motion commands, and modulates its output so a closed-loop axis can reach the commanded velocity and position with minimal following error. The amplifier is suitable for compact pick-and-place equipment, indexers, and small process drives that require precise speed regulation. Its control design supports both rapid movement and stable operation at low motor speeds.
The power section accepts an input of 200 to 240 VAC at 50/60 Hz. Input current reaches 2.2 Arms on a three-phase supply or 3.9 Arms on a single-phase supply, allowing the amplifier to operate with common low-voltage industrial power systems. The amplifier delivers a continuous phase current of 3.1 Arms and a momentary peak current of 12.0 Arms, while the internal bus has a current capacity of 20 A. Its maximum motor output is 400 W, and the power supply capacity is 0.8 kVA. Regenerative energy is directed through the braking circuit, which uses a minimum external resistance of 17 Ω and supports peak regenerative dissipation of 20 W. The velocity control range is 1:5000, helping the speed loop remain responsive when an application alternates between rapid travel and low-speed positioning.
The amplifier weighs 0.80 kg, which reduces the load on panel structures and movable equipment. It can operate at ambient temperatures from 0 to +60 °C and at relative humidity levels up to 95 percent. When the unit is not operating, it can be stored at temperatures from -20 to +65 °C. Cabinet airflow should account for heat produced during sustained operation and regenerative braking. The compact mass and moderate supply requirement make the unit practical for control panels with limited mounting space, while its broad velocity range supports axes that require controlled motion across substantially different operating speeds.
Frequently Asked Questions about GADSA02AH24:
Q: What is the required AC input voltage for the GADSA02AH24 amplifier?
A: The GADSA02AH24 operates with an AC input voltage range of 200 to 240 VAC, suitable for typical industrial power supplies.
Q: What is the continuous output current rating of the GADSA02AH24?
A: The continuous output current for this amplifier is rated at 3.1 Arms.
Q: What is the maximum motor output supported by the GADSA02AH24?
A: This model supports a maximum motor output of 400 W, accommodating mid-range servo motors.
Q: What is the operating temperature range for the GADSA02AH24 amplifier?
A: The operating temperature range of this unit is from 0 to +60°C for reliable operation in varying environments.
Q: What is the minimum external resistance required for using the regen function on the GADSA02AH24?
A: A minimum external resistance of 17 Ω is required when using the regenerative function with this amplifier.
