SCE905NN-001-01 Pacific Scientific
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
37 Seconds
The Pacific Scientific SCE905NN-001-01 is a servo drive from the SCE900 Servo Drives series and weighs 9.5 kg with dimensions of 370 mm height, 160 mm width, and 229 mm depth. It supports both analog and incremental digital command interfaces and provides a continuous current of 15.9 A at 25°C, with a peak current of 31.8 A. The unit is convection cooled and does not use a fan.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The SCE905NN-001-01 is a servo drive produced by Pacific Scientific for the SCE900 Servo Drives series. It acts as the power interface between a motion controller and a three-phase servomotor, modulating current for precise axis control in packaging lines, pick-and-place modules, and other industrial automation tasks. By converting command inputs into controlled motor voltage and current, it supports the closed-loop positioning required for coordinated motion. This type of drive is suited to applications where repeatable starts, stops, and speed changes must remain stable over continuous operating cycles. It is intended for industrial motion systems that depend on accurate response to changing command signals.
Its continuous output capacity is rated at 15.9 A at 25 °C, giving the drive enough headroom for sustained motion profiles without overheating. For short acceleration bursts, it can deliver a peak of 31.8 A, supporting rapid indexing or load changes during dynamic motion. Thermal energy is removed through a convection-cooled chassis with no integrated fan, so cabinet airflow still needs to be considered during installation. Command signals enter through the analog or incremental digital command interface, allowing either ±10 V velocity loops or step-and-direction inputs from a pulse source. The housing has a height of 370 mm and a front-panel width of 160 mm, which supports vertical mounting next to complementary power supplies and leaves predictable clearance for adjacent equipment.
The drive extends 229 mm behind the panel, and its aluminum frame weighs 9.5 kg, so panel depth and mounting support should match the enclosure layout. The unit ships with standard firmware, which keeps its control setup in line with the common operating arrangement used in the 900 Series. The rear depth affects spacing from back panels, wire ducts, and terminal blocks inside the cabinet. Its mass also matters when the drive is mounted on a vertical backplate that must remain rigid during normal machine vibration.
Frequently Asked Questions about SCE905NN-001-01:
Q: What types of command interfaces are available on the SCE905NN-001-01 servo drive?
A: The SCE905NN-001-01 supports both analog and incremental digital command interfaces.
Q: What is the peak current capability of the SCE905NN-001-01?
A: This servo drive offers a peak current rating of 31.8 A for demanding applications.
Q: What cooling type does the SCE905NN-001-01 use?
A: The SCE905NN-001-01 uses convection cooling and does not require a fan.
Q: What is the continuous current rating of the SCE905NN-001-01 at 25°C?
A: The continuous current rating for this model at 25°C is 15.9 A.
Q: What series does the SCE905NN-001-01 belong to?
A: The SCE905NN-001-01 is part of the Pacific Scientific SCE900 Servo Drives series.
