Product Description:

The SCE902AN-001-01 is produced by Pacific Scientific as part of the SCE900 Servo Drives series. It is a servo drive intended for closed-loop speed and torque regulation of brushless motors in industrial automation cells, packaging lines, and material-handling stations. By converting control signals into precisely metered phase currents, the unit allows the controller to maintain commanded motion profiles while protecting the motor from sustained overloads. This supports repeatable acceleration, deceleration, and stable running speed during normal machine cycles.

The drive delivers a continuous output of 3.75 A at 25 °C, meaning it can supply this current continuously without exceeding its thermal limits. For short acceleration bursts, it can supply up to 7.5 A, which gives the motor additional torque during brief demand peaks. Thermal management relies on a convection-cooled housing without an internal fan, so cabinet airflow must remove the generated heat. Command inputs accept either an analog velocity or position reference. They also support an analog or incremental digital command input, which helps the drive interface with both legacy PLCs and newer motion controllers. The enclosure stands 370 mm high, so panel layouts need enough space above and below the drive for cable routing and heat dissipation.

The remaining dimensions include a depth of 229 mm, which affects cabinet projection and overall enclosure depth. The drive uses standard firmware, which provides the normal control set for this series. It is built as a standard unit, so it follows the common hardware format used for this model line. The design also follows the broader 900 Series architecture, giving it the same general wiring approach used across related drive ratings. This layout helps the unit fit neatly into multi-axis cabinets where consistent spacing and organized cable paths are important.