121-235 Pacific Scientific
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Pacific Scientific 121-235 is a servo drive from the SC750 Servo Drives series and weighs 5.9 kilograms. It features a continuous current rating of 3.8 Amps with natural convection cooling and can deliver a peak power output of 2200 Watts. The drive has a maximum power dissipation of 45 Watts and a peak current of 7.5 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 121-235 servo drive is built by Pacific Scientific and belongs to the SC750 Servo Drives series. The unit receives step, direction, or analog velocity references from CNC or PLC hardware and converts fixed three-phase mains power into precisely shaped phase currents. By closing torque and velocity loops internally, it energizes compatible synchronous or DC servo motors while minimizing tracking error. This function places the drive at the heart of pick-and-place gantries, indexing tables, and other motion axes that require repeatable positioning within larger automation cells.
The continuous output stage is rated at 3.8 A, and this current can be delivered continuously without exceeding the thermal limits of the power transistors or connected motor winding. For rapid acceleration, the amplifier supports a peak current of 7.5 A, allowing short bursts of torque during indexing or rapid deceleration cycles. The electrical output available to the load reaches 2200 W, providing substantial power for the connected axis under full demand. Internal power devices dissipate up to 45 W, so the housing relies on natural convection rather than forced-air fans to keep component temperatures within operating limits. Adequate clearance around the housing permits warm air to rise away from the power stage during sustained operation.
A matched supply transformer rated at 3 kVA is recommended, providing sufficient capacity for inrush and regenerative currents without causing the voltage rails to sag. The chassis weighs 5.9 kg, allowing installation inside slim control cabinets without substantial structural reinforcement. Common connectors simplify wiring across multiple axes and allow consistent control connections throughout a coordinated motion system. The compact chassis can be positioned near related control hardware, helping reduce cable runs between the drive, controller, and motor. Its internal torque and velocity regulation supports coordinated machine movements while leaving the CNC or PLC to provide higher-level position and sequencing commands.
