Product Description:

The R32GENC-TS-NS-VS-00 is a servo motor produced by Pacific Scientific within the R Servomotors series. As a rotary actuator intended for industrial automation, it converts drive current from a compatible amplifier into controlled mechanical motion so that indexing tables, packaging machinery, or gantry axes can position loads with repeatable accuracy. The motor uses a standard winding set for general-purpose duty cycles.

The motor supplies a continuous stall torque of 1.7 Nm, providing load-holding capability when the shaft is energized but not rotating. A 3.25-inch square frame sets the mounting envelope and hole pattern for English hardware. The rotor’s reflected inertia is 0.071 kgm² × 10⁻³, a low value that supports fast acceleration without excessive drive current. Rated operation is specified at 4000 rpm, so motion controllers can run high-speed profiles without oversaturating the magnetic circuit. Housing style C encloses the stator in a smooth cylindrical shell that simplifies wash-down cleaning, and the English mounting type matches inch-based flanges. The motor does not include a brake, which reduces mass and eliminates residual drag.

During rapid moves the motor can develop up to 4.40 Nm of peak torque, allowing short bursts that overcome inertia mismatches or friction spikes. The permanent magnets use rare-earth samarium cobalt material, which raises flux density and maintains demagnetization margin at elevated temperatures. A Viton shaft seal limits oil or coolant ingress at the output end, extending bearing life. The lamination stack length of 2 inches sets the active iron volume needed for the available peak torque. Motion feedback is handled by a Tachsyn resolver, which returns analog velocity and coarse position data to the drive, and no secondary transducer is installed.