N32HLLG-LNK-NS-00 Pacific Scientific
Wake Industrial LLC is not an authorized distributor of this product.
The N32HLLG-LNK-NS-00 is a stepper motor manufactured by Pacific Scientific as part of the POWERPAC N Stepper Motors series. It features a NEMA 34 frame, a holding torque of 8.6 Nm, and a step angle of 1.8 degrees. The motor has a 3.38 inch square frame, a single straight key shaft design, and uses a splashproof conduit connection to a terminal board.
Internal Product Review
The N32HLLG-LNK-NS-00 is a Pacific Scientific stepper motor built in a NEMA 34 frame with 8.6 Nm holding torque. Motion performance is especially appealing, with 200 full steps per revolution and ±3% step accuracy supporting consistent positioning. Standard construction and heavy-duty NEMA mounting make the motor a dependable choice for industrial stepper applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The N32HLLG-LNK-NS-00 belongs to the POWERPAC N Stepper Motors series from Pacific Scientific. It is a NEMA 34 hybrid stepper motor intended for positioning or indexing tasks in industrial automation where open-loop motion control is acceptable. The unit converts digital pulse streams from a drive into incremental shaft rotation, delivering discrete angular movement without requiring an encoder or resolver.
This model generates a holding torque of 8.6 Nm, so it can maintain the load position while current is applied. Each full step moves the shaft by 1.8°, and the motor completes one revolution in 200 full steps, providing fine mechanical resolution for lead-screw or timing-belt systems. A square frame measuring 3.38 in. matches standard NEMA 34 brackets, while the motor has an overall length of 133 mm, allowing accurate planning for installation depth and coupling alignment. Heavy-duty NEMA mounting holes, a laminated rotor, and a single shaft with a straight key support repeatable torque delivery during the rapid start-stop cycles common in pick-and-place equipment, labeling machines, and small gantry axes.
The electrical insulation is rated for 340 VDC, and the insulation resistance is rated at 100 megohms. Power enters through a conduit fitting with a 1/2 in. NPSC pipe thread; this splash-resistant path routes lead wires directly to the internal terminal board for protected field wiring. The stator windings use a four-lead series configuration, allowing the drive to apply a single current loop to each phase and simplifying the electrical connection. Standard construction materials support operation in indoor industrial machinery, while the lack of a shaft seal makes the motor best suited to locations with limited exposure to moisture and contaminants.
