PCE833-001-N Pacific Scientific
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
35 Seconds
The Pacific Scientific PCE833-001-N is part of the PC800 - PCE800 Brushless Servo Drives series. This drive supports a motor AC supply of 380 to 480 VAC in 3-phase, and offers a continuous output current of 3.75 ARMS with a peak output power of 6.4 kW at 480 VAC. Its command interface includes RS-232/485, ±10 VDC, Step/Dir, and Indexing, and the power stage operates at 97 percent efficiency.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PCE833-001-N is a brushless servo drive from Pacific Scientific that falls within the PC800 – PCE800 Brushless Servo Drives series. It is designed to regulate torque, velocity, or position of permanent-magnet motors in automated machinery, linking the controller layer to electromechanical motion. This unit accepts a three-phase supply of 380/400/480 VAC and communicates through RS-232/485, ±10 VDC, Step/Dir, or Indexing commands, giving it flexibility for PLC or PC-based control schemes.
Under steady load it delivers a continuous output of 3.75 ARMS and furnishes 2.6 kW of continuous mechanical power when powered from 480 VAC. Drive output is filtered at 16 kHz, a switching frequency that minimizes audible noise and ripple torque. Internal losses are limited by a 97% power-stage efficiency, so cabinet heating remains moderate and thermal derating is avoided. A KTK-20, 20 A, 600 VAC fuse is specified for branch protection, while inrush events can reach 175 A. The RMS line demand is 5.1 ARMS during normal operation. For energy returned during deceleration, an external 66 Ω, 200 W regeneration resistor can be wired to the DC bus. Motor compatibility spans 5 mH to 5 H of inductance, allowing both low- and high-impedance windings.
Building on those continuous figures, the drive supports a peak output of 7.5 ARMS for short bursts and a momentary current crest of 10.6 A from zero to peak for rapid torque rise. This capability translates into a surge power ceiling of 6.4 kW when the application calls for fast indexing or load acceleration. Motor leads may be routed up to 50 m without violating rise-time or EMI limits, provided the cable meets the stated inductance window. The wide inductance range lets the drive operate with both compact, low-reactance motors and larger units that store more magnetic energy.
Frequently Asked Questions about PCE833-001-N:
Q: What command interfaces are supported by the PCE833-001-N servo drive?
A: The PCE833-001-N offers command interfaces including RS-232/485, ±10 VDC, Step/Dir, and Indexing for flexible integration.
Q: What is the continuous output current rating for the PCE833-001-N?
A: This drive supplies a continuous output current of 3.75 ARMS for reliable motor operation.
Q: What is the continuous power output at 480 Vac for the PCE833-001-N?
A: The PCE833-001-N achieves up to 2.6 kW continuous power output at 480 Vac.
Q: What is the maximum motor cable length supported by the PCE833-001-N?
A: A maximum motor cable length of 50 meters is supported by this device.
Q: What line fuse should be used with the PCE833-001-N servo drive?
A: The recommended line fuse for this drive is a KTK-20, 20 A, 600 VAC fuse.
