Product Description

The Okuma BL-MC300E-20S is a digital servo motor. Permanent magnets are used for motor construction. The servo motor is designed for industrial applications. The servo motor should only be installed by trained and qualified personnel. The motor should be operated according to the ambient and operating conditions that are specified in the product documentation. The safety instructions specified by Okuma in the product documentation should be followed at all times. The BL-MC300E-20S motor should only be used with accessories and spare parts that are approved by Okuma. Use of substandard spare parts and accessories can affect motor performance and reliability. Okuma will not accept any responsibility for damage or injuries caused by improper use of its products. Improper use of the BL-MC300E-20S will also void its warranty. The motor should only be mounted in the approved mounting positions.

The product line to which the motor belongs is BL. The motor is one component of an industrial drive system. The other system is a drive controller. The motor gets power from the drive controller. The motor also shares feedback about its operating parameters with the drive controller. The device that enables measurement and sharing of feedback is an encoder. The function of the drive controller is to make sure that the motor parameters match those that are set by the operator or user. The rated continuous output power of the BL-MC300E-20S motor is 6 kilowatts. The rated stall torque of the BL-MC300E-20S motor is 31.5 Nm. The motor is designed to operate at 133 Volts, 133 Hertz and 26 Amps. The input AC voltage has to be a three-phase voltage. The BL-MC300E-20S is an eight-pole motor.